Search results

I bought my fox 2.0 res shocks and have only put roughly 40k miles on them. This is all road miles and one off road trip. I checked them the other week and they are all bad already with no rebound. Also they didn't use any ss hardware on them so the sleeves in the bushings we're seized to my...

Hello all I posted a while ago about how poison spider would not send me the tire carrier portion of my rock brawler 2 bumper. I already had the bumper and it had the hole in it, I bought it sperate with the assumption I could add the tire carrier later. Anyways I finally got around to welding...

I currently have rk 2.5 springs with 1" spacers. My total actual lift is 3.5". I have a 12 jku with bumpers front and rear. The rk springs I have are a couple years old and the old style and they are riding too stiff so Im planning on changing them out to plush rides. When I originally did the...

Just putting this out there for other to look for. I have roughly 10,000 miles on my ko2's. I 5 tire rotated them every oil change and have only been on one off road trip so far with them. My lugs are starting to loose chunks on one of my tires. They are all the same row of lugs also so I'm sure...

The write ups I see about setting caster show taking the measurements with the tire off. How does this happen? Do you put jack stands under the axle; couldn't they slip when moving the axle around? Or do you support the frame and just let the axle hang; would that show proper measurements?

Just saw this article. The JL is confirmed for an ecodiesel and straight axles front and rear. http://www.fourwheeler.com/news/1605-first-look-2018-jeep-wrangler-jl-in-heavy-camouflage/

I bought metalcloak upper arms and a track bar a couple years back when I was a greenhorn and didn't know better. Well I've been dealing with handling issues and decided to double check my castor. Anyways here is what I found about their junk. Not sure if this is normal for upper arms but I...

I raised my track bar mount so I no longer need adjustable. It has been off my jeep and sitting outside for about a year now (I have a different brand adjustable on the jeep now). The bushing looks good. The heim joint should just need oil. The rod itself is starting to rust so it could use a...

I have trucklites installed. I noticed with my old headlights and even these they seem angled to far down. I remember adjusting the stockers to the 25' back and 3' up adjustment. I read somewhere that you park against a wall and mark the light locations than back up 25' and adjust them using...

Hello all, I have a jku right now that is built up currently. I use it for my dd. I have a neighbor selling a xj and I'm debating getting it for just a trail rig or keep building my jku. Im not sure of the year on the xj it is completely stock. It needs a radiator since it froze one winter, the...

Has anyone bought the or fab tire carrier without rotopax and then installed the rotopax at a later date. I'm just wondering because I've heard the non rotopax version sits closer to the body. If the difference is minimal I'll just get the rotopax version. Does anyone has issues with rotopax...

Im a college kid so I searched around and ordered the poison sypder rock brawler 2 rear bumper. It had the hole in the bumper and the short text description said it will work with a tire carrier. Needless to say a year later (today) I looked into getting just the tire carrier portion. I emailed...

My jeep has been handling badly for close to a year now and I just now had time to take it in for my alignment specs (attached). It has 3.5" lift. The camber isn't to far off, the caster is off one degree from each side (does this matter/ is the axle bent), the toe I have measured it out to 1/8"...

I parked my jeep last night. All was fine. Go to get in it today and it has 3/4 play and only 1/4 of engagement. I check my master cylinder and the rear portion is empty. I crawl under the jeep and notice this. It mostly seems to be coming from the vent slit around the Bell housing with only...

Hello all again, I am having issues with me drag link end at the pitman arm side. I have a RK drag link and have had moog ends. The pitman arm end keeps failing and Im about to be on number three within a year since my second is bad again. Am I better off getting it replaced again under their...

I have a leak coming from the front of my ac compressor. It is slinging oil everywhere under my hood. It use to be gradual but seems to be getting worse. Is there a front seal that can be replaced or would I need a whole new compressor since its also low on oil I'm assuming. Thanks!

I have a couple questions about trimming my fenders. First the door guard that goes on the edge does that get glued on or is it able to stay by itself? Second the side marker lights; I'm putting on led side marker lights. Has anyone gotten them to work as running lights and also blink with the...

Hello all. I knew I was on borrowed time and I tore my driveshaft boot on the trail. I'm still riding today. Is it something I can ride on today and just undo the driveshaft for my 6 hr drive back home or do I have to undo it and ride trails in 2wd

My side marker socket lost a contact for the bulb. Does anyone know the part number if its sold separately. I can get a whole new light assembly which has the socket but I only need the socket. Its the circled part in the picture.

I'm having this issue were I keep losing my illumination. First it was for the driver side rear window. Then the 5 on the stereo. Now my driver side switch lost illumination. Anyone else having this issue?