Recent content by ralfman5

I want to know if you need to have a minimum of 2.5 inch between the shock end cap and spanner? What would happen if its less? Thanks Sent from my SM-N950U using WAYALIFE mobile app

hopefully install goes smoothly!!! Sent from my SM-G935T using WAYALIFE mobile app

this after 6 months in nyc. Sent from my SM-G935T using WAYALIFE mobile app

I put together a dynomax evo competition exhaust system by buying all the parts separately for my 15jku and the sound was awful, i even stopped driving my jk for 2 weeks so it was such a turn off. I ended adding the resonator pretty much making my system the quiet crawler exhaust and wow, a huge...

Good evening, I am installing the evo lever on my dana 44 rear axle. I started stick welding the track bar bracket and i noticed that it had a gap on the rear of the bumpstop. This was the only position that would place the axle side mount flush with the axle and also the track bar mount...

Hello everyone, I would like to know if the front and rear sway bar links have to be the same size? or does the sway bar have to be at a certain angel on each side? just getting everything ready for the install. Should I adjust the coilovers on the rear to show the same amount of thread...

It took me over a month to complete on my own and working on it 2 to 3 hours on the weekends. Its finally over and it feels great. Thanks to everyone who guided me on this forum....it cab be done solo!

Should i cut off the side of the trackbar bracket where sway bar goes?... Doesnt seem to have room for dtd axle bracket. Thanks

Hey,today i started my journey installing the front evo dtd on my own with just a sawzall and a angle grinder.. Any advice welcomed..

Will a mid width front bumper clear a 37" and or 40" tire without rubbing issue or you need a stubby front bumper??? Thanks.

If you have, did you have a roll cage? and does it really help not bending frame? last question is im planning on getting the PSC rocker knockers, i want to know if its compatible with my evo long arm bolt on kit? Thanks

Uprading from a factory tie rod to a heavy duty tie rod make any difference in steering? And in what does it does improve anything steering related? Thanks.

Hi everyone, i have a 2015 jku with 3" lift and evo long arm kit, pr44 and i just got my alignment done at a shop and i received a print out of my settings. I would like to know if these numbers are good and what would i need to fix..