NickarendPDX's latest activity

Good to know! The front looks way easier and faster to install than the rear. I'm looking to install next week when the spacers arrive...

You're the best, thank you!

So long as the sway bar arm sits at about 5° above horizontal or still has an angle between it and the link at a full droop, no. The...

I'll try the spacer first, simply because they've already been ordered. Once they are installed, will I need to adjust the length of...

I know well enough that youtube is filled with misinformation. That's why I came here to ask people who have more expertise or first...

Depends on how much lift you have on your Jeep now. If you have tall coils, you may find it still tough to get the coil out even with...

Ok good to know. I heard it mentioned a couple times from watching Youtube videos. I've got a 3.5" lift on it right now. Good to know...

I'm going to be installing a 1 inch Teraflex spacer to the front and rear passenger side to correct a 1" lean. I'm looking for...

I've taken measurements and much like many others, my passenger side is exactly 1 inch lower both front and back. If I got a 1 inch...

Ok I have to update and also say thank you. I installed the Dynomax today. First without the resonator. At idle it sounded great, but...

But if I was wanting a drone, perhaps the resonator delete would check the box? Again, as mentioned, I'll only know by trying it. So I...

My only hesitation with going that route is that I bought the Dynomax on Amazon, which means I can easily return all the parts for this...

Ok, that being said, let's mention the resonator. The Dynomax kit I bought also has a bullet resonator. The videos I've watched about...

I need some direction, even if it is to give me some peace of mind. I've got a 2016 JK and have been going through the research steps...

For those who welded, did you use a Mig welder with a 70s steel wire? Asking because my neighbor said he would help me weld it, but...