Recent content by MORedJeep

Definitely agree if you can find the part. My Jeep is my daily driver and i couldn’t wait. It was either the Dorman part without the cooler or my 2nd OEM part. I had the dealer do the first one 4 years ago.

I replaced my cooler about a month ago. I also was unable to find the Dorman, gambled and used Dorman part 926-876 as suggested above for $217. This is the housing, including all gaskets but without the replacement cooler. I had read that the actual cooler rarely fails as it is typically the...

Thanks for the info, and wow, i just re-read my post, looks like i need to proofread before posting in the future.

Adding to an old thread concerning the a EVO drag link flip kit I installed, the ball joint on the pitman arm side of the drag link needs to be replaced. Any suggestions on is good replacement? Any of them better than the rest?

Thanks, checking the torque on the jamb nut is definitely something i should have been doing. I will take a closer look at the links but along with the joints being seized the ends of the rods looked to be rusted inside and out.

Thank you all for your suggestions and help, I removed the EVO links and the rods are pretty rusted along with the seized Heim joints I think I’m going to replace them with another brand. I did contact EVO about new heim joint cost and asked about maintenance and was told they are maintenance...

Thanks I will try that when I get back to STL and get them off the Jeep. I don’t know if I trust myself with a torch, bad things tend to happen when I play with fire lol.

So i crawled under the Jeep to take a look and see if I could get the links back together and it seems that the bottom heim joint on each side is seized up and i can’t turn the hex bar. I will need to spend some more time on it tomorrow. As the last commenter pointed out, it has not been...

Thanks, appreciate the input.

I installed a set of EVO sway bar end links in 2020 when installing a 3” lift and yesterday, while on a family vacation in Michigan, I heard some rubbing so i crawled under the Jeep and both the end links on the rear have come complete apart. It looks as if the bar unscrewed from the end but...

Changed the diff fluids today, front was good, back had a couple small pieces of metal so I popped it and found this. Sent from my iPad using WAYALIFE mobile app

That makes sense, here’s a couple pictures. Sent from my iPhone using WAYALIFE mobile app

Last night I changed the oil in my 2014 JK with 133,000 miles on it. I’ve been having a ticking for a month now that was faint at first but is progressively getting louder. Based on what i have read and where it is coming from I believe it is a driver side rocker that has a bad needle...

Need some advice and sorry beforehand for the long explanation. I installed a 3” EVO Enforcer lift, drag link flip kit with fox shocks a few weeks ago. I had 130k on my original shocks so they were toast. With the Fox shocks the new ride is firmer and I’m getting to like it. I am looking at...

I have been a member for awhile but only trolled until this post. Last weekend I installed a EVO Enforcer stage 1 3” lift and each time I needed some advice i googled my question and a WAYALIFE Project JK posts site answered it. Great information delivered in an unassuming way. No matter how...