Recent content by mcsjk

Which nut are you referring to? The one that is straight up and down in the picture (doesn't actually have a nut on it in the picture) or the nut that tightens and holds the terminal onto the post? I don't have anything hooked under the nut that holds the terminal onto the post but I do have a...

So I've been having an interesting electrical issue lately and I have no idea what is causing it. Here's a video of what's happening: (Sorry for the vertical video) Basically, I'll start the Jeep, it turns over just like it should, runs just like it should. But randomly that will happen. I...

Sorry to hear that. We had a great first day in GA. Had at least 60 people out in the field and man were they flying. This picture is only about half of the birds, the other half had already been cleaned: Edit: Just realized that posting a picture of dead animals on the forum could upset...

Made an angled tire carrier that goes with the slant of the Trektop and relocates the license plate.

Did the same thing with mine. Perfect spot for it. If you're looking for what to do with the handset, I ran mine behind the dash (there's a gap at the bottom) and screwed the mic holder just above knee height on the driver side of the dash. I leave it there all the time and it's always plugged...

I had my clutch replaced in the fall and ever since I had it done, when I am driving on the highway for an extended period of time I lose a ton of pressure in my clutch pedal. Sometimes to the point where I get locked out of shifting into gear and have to pump the clutch to get pressure back in...

I love my TL's. I took a couple of comparison pictures. I took these before I had adjusted them. Stock low beam: TL low beam: Stock high beam: TL high beam:

What are the thoughts on Reid knuckles? Thinking about getting them, Prosteers, and probably Carolina Metal Masters tie rod. I currently still have my stock 30 but plan to move up to a 44 sooner than later and know that I can reuse the knuckles and prosteers with a 44. Is it worth it to spend...

Got my winch and Cobra 75wxst CB radio installed today!

Recently purchased a used WARN 9.5cti that had been on a multi-mount and therefore has the quick disconnect cables. But on my Jeep it's just going to stay on my front bumper so theres no need for me to have the quick disconnects. How difficult is it to replace the quick disconnect cables with...

Trucklites finally came in.

Gotta love doors off weather.

Apologies for just getting back on this. Here's a pic. I'm trying to keep the back as visually pleasing as possible (i.e. keep the cable as hidden as possible if that makes sense).

Looking for a synthetic winch line to replace the wire line on my Warn 9.5cti. New or lightly used preferably. Not too picky about brand but will be putting a Prolink on it so the Quadratec one or others with the hook already attached won't work.

Due to my tire carrier being slanted (follows lines of Trektop), I won't be able to run my coax cable through any of the holes in the tailgate. I am curious if running it through the bottom of the tailgate where it closes or through the side where it closes, would cause any serious pinching...