Recent content by JordanFoote86

Finally managed to get all the parts and tools together need to do this job. And I cannot fault Dynatrac for the quality of these ball joints!! The Install actually went really smooth without a single hitch!! Sent from my Pixel 2 using WAYALIFE mobile app

I've just been installing new Dynatrac HD ball joints and thought while I was there I would fit my Big Rotor Kit. But when I went to swap over my Caliper Slide Pins the hole diameter in the new brackets is smaller than the slide. This is by a considerable amount as well. Has anybody else...

Sent from my iPhone using WAYALIFE mobile app

Hey guys, I was wondering if anybody knows how easy it is or has done it at home and what the best selection of tools are for changing the ball joints on the Drag Link and Tie Rod? Cheers Jordan Sent from my iPhone using WAYALIFE mobile app

Sent from my iPhone using WAYALIFE mobile app

When turning at low speeds I get a lot of vibration up through the steering wheel. I have checked all the steering components and haven't found anything loose. Any help and suggestions which be much appreciated. Thanks Sent from my iPhone using WAYALIFE mobile app

Yesterday I managed to get them painted and fitted on the Jeep. Sent from my iPhone using WAYALIFE mobile app

Finally got back at these today. I started by trimming back the inside lip of my Busheacker Fenders, so that the inner fenders could slide up behind. Outer Fender sitting flush over the inner Fender. Decided to go with using the nut on the rear of the Allen bolts. Lucky for me my custom...

Didn't have much time to work on them today, but managed to rough them both up front and backs ready for painting. Sent from my iPhone using WAYALIFE mobile app

Finally got around to starting modifying my inner fenders today. As I live in Saudi the engine likes to get a little hot. So to help tackle this I have made some custom ventilation. Here are some pics of what I have done so far hopefully will get around to finishing them tomorrow. Sent from...

Sunset from Saudi!! Sent from my iPhone using WAYALIFE mobile app

This week all I've done is switch the HiLift from front mounting to rear mounting. Sent from my iPhone using WAYALIFE mobile app

This has probably been asked many times but does anybody know anywhere that sells Hubcentric Rings sized 78.3 - 71.5 mm?

I'm going to upgrade my Brake Lines, when looking at options there are lines which are made for my 2.5" lift and there are lines made to go from 1.5" - 6". Obviously I'm looking at ones with height range so I won't have to go changing again in the future when I go with a bigger lift. But my...

Hello I was wondering if it is worth getting rear spring correction wedges for spring bowing when only having a 2.5" lift?