Recent content by Jay Ellyou

  1. Jay Ellyou

    Noisy Fuel Injectors

    If you got a 2018 its still in warranty, but be prepared for a fight, mine got repaired under warranty, unfortunately FCA would only replace what was damaged at the time, the dealer had to photograph and document every cam lobe, every lifter and every rocker, the JEEP warranty decided what was...
  2. Jay Ellyou

    Noisy Fuel Injectors

    Update on the noisy 3.6, so after 3 visits to the dealer and eventually permission from FCA, the dealer has opened my engine up and I have the Pentastar Tick, scored lifters cam shaft and rockers, hopefully FCA are going to sign off on replacing everything.
  3. Jay Ellyou

    ARB Solis Lights

    Any one out there fitted ARB Solis lights using the ARB wiring harness, I spent hours installing about 3 miles of wire, connecting it all up only to find it doesnt work, the ARB website says they may not work on a CANBUS controlled system and to contact them for a fix, they also give you a work...
  4. Jay Ellyou

    Where to install accessory fuse block 2021 3.6L

    Rough Country MLC 6 Installed in a RHD JLU Sport , gives you six accessory switches all wired to the relay module under the bonnet, makes things really easy to wire up once installed
  5. Jay Ellyou

    Whats this for?

    How do you get it to light up, mine never lights up, tried plugging in the seatbelt with no one in the seat, I don’t get a momentary on off when I start up, I also read somewhere that it could be turned on/off via the dash binnacle computer, that’s not there either
  6. Jay Ellyou

    Whats this for?

    I have a 2019 JL Unlimited Sport and have this installed above the rear view mirror, is it just a blank, I'm assuming the Rubicon has something mounted here, I bought some ARB Solis dimmable spot lights and I am looking for somewhere to mount the dimmer.
  7. Jay Ellyou

    Skid Plates

    Thanks Jeepers, like the look of the M.O.R.E products and aluminium so definitely the way to go as I am weight conscious, also good to hear your views on the factory skids, didn’t realise they were that good so will just probably protect the oil pan and trans cooler lines and maybe the FAD, I...
  8. Jay Ellyou

    Lifting a JL

    I had them on my JKU, I use them for levelling the Jeep when towing.
  9. Jay Ellyou

    Lifting a JL

  10. Jay Ellyou

    Skid Plates

    So what armour is everyone running underneath?
  11. Jay Ellyou

    Lifting a JL

    2.5” AEV Lift with airbags, just looked at my DS clearance, no where near the cross member!
  12. Jay Ellyou

    LED DRL’s 2019 JLU Sport

    I found some JW Speaker LED’s which in thoery should have been a direct replacement for my incandescent DRL / Side light lamps, I fitted them and cannot get them to work, I have the JScan app and security bypass cable for the OBD reader, but even after playing with settings still cannot get them...
  13. Jay Ellyou

    Wrangler JLR Steering Damper Relocation

    I just went with the Fox steering damper, it comes with its own clamp for the RHD JLU, now I just got to cut & grind that monster lump of steel off the axle
  14. Jay Ellyou

    ACM Mount RHD Models

    G’day Wayalife, I watched your youtube video on installing the ACM bracket and ARB compressor, I have the same ARB compressor and have been contemplating where to mount it, so many different ideas, I checked out my RH drive JLU, and there seems to be the same amount of space under the brake...
Top Bottom