GoMopar440's latest activity

I'll take them. I'll send you a message for details.

Today I started by removing the factory rock slider from the passenger side. Two out of the three larger bolts snapped off, so I...

I put one of the running boards on between a break in the weather. I'll get the other side installed when it clears up.

Drilled and tapped a couple holes into the inner fender to mount the keyed power fuse block. I ran the power and ground wires to the...

Why do people do this??

With all that trimmed, everything sits like it should when it's back together. You can see the big power and ground cable between the...

Lots of pics today. Started out by making a bracket to mount the rear fuse block. Just had to find some metal to make a bracket for...

Slightly less well known than the Oscar-Meyer Weinermobile, it's the Bootmobile. Seen today on Main Street in Lewiston Maine.

I sanded the bottom of the port adapter thingy so it would fit the contour of the panel better. I also flattened the bumps under the...

I got most of the parts today, but the weather isn't cooperating, so I'll start installing them tomorrow. (y)

Buncha parts inbound... Stay tuned. ;) (y)

Thanks. That's I the look I was going for. I like mods that you have a hard time telling if it came from the factory that way or not.

I forgot to add that I tried the panel with the spaced out power port. The prongs on the back of the plug still hit the sheet metal...

Today I cleaned out the old aftermarket amp wiring that was found under the big floor bin in the cargo area. I also pulled the 4ga power...