1tmjpr's latest activity

Run the driveshafts you have until they wear out. Then get cardan driveshafts made at a local shop. Nothing wrong with an Adam’s...

Thanks! Will look up that brand.

Well, if you’re determined to upgrade, make sure you get a 1350 and not a cheaper 1310. The one u-joint that comes on the factory front...

With that said, what drive shaft is recommended. I see, or hear a lot on Adams DS. Any other recommended, or that is the one to go with...

Upgrading driveshafts really depends on what size tires you’re running and what height lift you’ve got on. In my opinion minimal lifts...

At 3” of lift you will need a front driveshaft and if you have a 2 door you will end up needing front and rear shafts. Look for a local...

Being that you have a 4-door, the rear is totally unnecessary. As mentioned, if you're lifted, the front will go bad sooner than later...

Looking to upgrade driveshafts. Haven't had any funny, or weird issues. Just wanting to know, if it is highly recommended to change out...