Can anyone help identify my Jeep parts?

[Bbobtucker]

Hello all,
I bought a project and want to replace ball joints, tie rod ends, and suspension bushings. Can anyone help identify what parts I should be buying? I think, at least, the axles are oem so ball joints should be oem but what about the rest? Or does anyone recognize it? I just bought it in Savannah, GA although it looks like it was built for North GA rather than the coast but still. Thanks in advance.

 

[kevman65]

I'm not much help, but the suspension appears to all be worn out aftermarket.

The reason I'm responding, rear axle, driver side, the tube appears bent right below where the square tube is welded on. Could be an optical illusion, but might want to get it checked out.

 

[wayoflife]

Looks like you've got a Clayton long arm kit, G2 differential covers, Poison Spyder fenders, RockJock Antirock and some kind of custom bumper.

 

[Bbobtucker]

I'm not much help, but the suspension appears to all be worn out aftermarket.

The reason I'm responding, rear axle, driver side, the tube appears bent right below where the square tube is welded on. Could be an optical illusion, but might want to get it checked out.

Yeah, I'll have to look more closely. That pic does look funky, but I didn't notice anything while under there. Thanks!

 

[Bbobtucker]

Looks like you've got a Clayton long arm kit, G2 differential covers, Poison Spyder fenders, RockJock Antirock and some kind of custom bumper.

Nice! Good info, thank you! Any idea if the steering bits look to you like they are using stock tie rod ends?

 

[wayoflife]

Nice! Good info, thank you! Any idea if the steering bits look to you like they are using stock tie rod ends?

Not the best pic to tell from but that looks like an aftermarket drag link to me. Being that it looks like you have a raised front track bar, you most likely have a dropped pitman arm to go with it.

 

[Bbobtucker]

Not the best pic to tell from but that looks like an aftermarket drag link to me. Being that it looks like you have a raised front track bar, you most likely have a dropped pitman arm to go with it.

Drag link doesn't look stock to me either. Idk about the pitman arm. Thanks for the advice!

 

[WJCO]

Looks like johnny joint ends for some of those control arms. Ball joints look factory.

 

[wayoflife]

Pitman arm is definitely a dropped one. Standard stuff with a lift as tall as yours.

 

[wayoflife]

Drag link and tie rod are definitely aftermarket. Normally, they're connected.