Steering Issue

[Desert Crawler]

After an accident which bent the tie rod and steering stabilizer, my jeep was repaired and aligned at a local dealership. It doesn't drive bad, but the steering wheel turns about 1/4 more revolution to the left than to the right.
End range photos:
Just beyond 1 1/2 turns to the left

1 1/4 turns to the right

Could someone check to see if their end range steering positions are symmetrical before I complain?


Sent from my iPhone using WAYALIFE mobile app

 

[VeruGE*144]

That can depend on how the steer stops are set up or even steering stabilizer can act as a steer stop sometimes lol.... ask me how I know.



Sent from my iPhone using WAYALIFE mobile app

 

[Desert Crawler]

Good to know. Had already checked the stops and they look symmetrical. I will pull the stabilizer off and check it again before I bitch. What I was wondering is the steering wheel travel equal on a stock jeep.


Sent from my iPhone using WAYALIFE mobile app

 

[jeeeep]

Good to know. Had already checked the stops and they look symmetrical. I will pull the stabilizer off and check it again before I bitch. What I was wondering is the steering wheel travel equal on a stock jeep.


Sent from my iPhone using WAYALIFE mobile app

it's pretty equal - I think it was 2.5 turns each direction