PLEASE HELP Jeep Jk 2012 all monitors ready except o2 and Evap

[FrankyJeep]

Someone please Help.....I need to Pass inspection and the o2 and evap will not reset.

 

[OverlanderJK]

Fits for anyone that is wondering this is not a forum announcement.

Second, thank you for all the information for us to help you.

Third, reset it.

 

[cozdude]

Someone please Help.....I need to Pass inspection and the o2 and evap will not reset.

Makes sure you have between 1/4 and 3/4 tank of gas for evap. It will run overnight after driving. For O2 I usually do 5-10 miles at highway speed, no faster than 60 mph, then do some stop and go traffic. That’s how I get all the monitors to set. In PA you only need 7 out of the 8 to set for you to pass the emissions test so focus on the O2 sensors rather than the evap

 

[FrankyJeep]

Fits for anyone that is wondering this is not a forum announcement.

Second, thank you for all the information for us to help you.

It worked thank you so much. I need 7 also because I’m in jersey. The EVAP was ready and I flew straight to the inspection station.