Front axle is shifted 3/4" to the passenger side

[DMF]

After I put in my Synergy flip kit and added the raise track bar bracket. My axle is shifted 3/4" more to the passenger side. My track bar is adjustable but it won't collapse any further. Would I have any drive line issue, everything feels fine at the moment even though it's shifted.

 

[black pearl]

If you have it put the stock trakbar back in, most adjustable ones won't go as short as stock


Sent from my iPhone using WAYALIFE mobile app

 

[DMF]

If you have it put the stock trakbar back in, most adjustable ones won't go as short as stock


Sent from my iPhone using WAYALIFE mobile app

No, I don't have a stock track bar. Guess I'll go visit Craigslist.

 

[black pearl]

No, I don't have a stock track bar. Guess I'll go visit Craigslist.

In the mean time, it's not going to hurt anything to run it as is.


Sent from my iPhone using WAYALIFE mobile app

 

[DMF]

In the mean time, it's not going to hurt anything to run it as is.


Sent from my iPhone using WAYALIFE mobile app

Thanks Black Pearl, that's what I was hoping. I'll replace it down the road when I replace my tie rods too.