CUSTOM PSC HYRDO ASSIST KIT PLEASE HELP!!

Yuel1298

New member
What’s going on guys, hope all is well, I could most definitely appreciate some pointers and/or advice on my most recent investment for my 2010 JKU Sport. I’ve pretty much rebuilt my 4” lift from scratch, doing whatever I could to get rid of my death wobble and bump steer. Death wobble is gone, but bump steer is still heavily present, also noticed slack in my steering wheel and gear box. Decided to invest in a hydro assist steer er kit. I wanted run my purchase by some experts to make sure I got everything I absolutely needed and nothing extra. Appreciate the help in advance!! C78038BF-88EE-42C9-9A1B-E86C40B51216.png AE0B4CE7-21ED-49C5-BEDB-7DF74E041C7B.jpeg 8A36B1DF-96C4-4451-BB58-B1DF32FA61A4.png FB1C6014-AAEA-4063-8265-1C398F69E2DD.png 1271A626-CC43-46AE-99E8-221DB3C56DA4.png 3BE69A5C-4E2C-4A5F-A27E-817A4809E594.png
 

wjtstudios

Hooked
Is the steering gear that you ordered ported? It doesn’t say or looked like it in the picture. As for the rest of it, I ordered everything from PSC and worked with them over the phone so it was all built exactly for my Jeep verses building it from parts from multiple suppliers. The Ram size is dependent on your axle and steering length. You can measure that by turning lock to lock and having a fixed point to measure from on your tie rod.
 

MericaMade

Active Member
What Bill said. The part number does not show its a ported box it says a OEM replacement. IMO I would cancel your entire order and call PSC directly.
 
Top Bottom