Coil overs stop ring

[rogerk93]

Ok so my coil overs came in today and I noticed that the stop ring are a few inches from the top which dosent seem right. If you guys have any pictures of where you have yours set or any insight to where I should have them set?


Sent from my iPhone using WAYALIFE mobile app

 

[rogerk93]

I know the picture is not a good one to show you where they are but that’s the only one I took


Sent from my iPhone using WAYALIFE mobile app

 

[Gobicon2017]

I know the picture is not a good one to show you where they are but that’s the only one I took


Sent from my iPhone using WAYALIFE mobile app

Here ya go. I have mine set at 3/4” above slider.


Sent from my iPad using WAYALIFE mobile app

 

[Gobicon2017]

Might also check nitrogen level. Mine were all at a different psi!!!!


Sent from my iPad using WAYALIFE mobile app

 

[rogerk93]

Yea these came way off then,I have to do an adjustment to them and once I get to test them adjust it a little more. Now that you said that I’ll check the nitrogen to see what they are set too


Sent from my iPhone using WAYALIFE mobile app