Brankz needs a stinger ( help )

The 1/4 pounder is sweet and I was looking at that. I really wanted to keep my fogs recessed though so I went with the Warn stubby wthout bar. I still have jack points and my winch is not recessed like the 1/4.
 
10frank9 said:
What he said. You're looking at $650 plus tax. D ring option is for those who run the 1/4 pounder without the stinger. The fairlead is for synthetic winch lines.

View attachment 60356
Click to expand...

So your saying with only stinger option you still get shackle tabs? Also dose the bumper come power coated ? I'm looking at ether EVO, PSD, or Crawler conceptz ?
 
Brod said:
So your saying with only stinger option you still get shackle tabs? Also dose the bumper come power coated ? I'm looking at ether EVO, PSD, or Crawler conceptz ?
Click to expand...

The stinger has the shackle tabs welded onto it. And yes it comes powder coated or raw. Aluminum is only available in raw I believe.
 
Heck, you can buy the EVO in stages if you want. I was looking at EVO's, and wanted a stubby that could use the factory fogs. Ended up going with a Warn no bar. Saved about $500 bucks.
 
Brod said:
So your saying with only stinger option you still get shackle tabs? Also dose the bumper come power coated ? I'm looking at ether EVO, PSD, or Crawler conceptz ?
Click to expand...

You'll need the EVO vacuum pump relocate brackets.
 
I loved my poison spider but this time I'm building my rig Evo style no matter how long will take me to get all Evo

Get the Evo stinger 👍👊
 
Good choice on sticking with the EVO 1/4 pounder! BTW you only need

Bumper: no shackle tabs, no vacuum pump
Stinger: Powder coat

Total: $649.98

(EDIT)
Apply the Northridge 4x4 discount and you have a great deal!
 
Last edited:
just save up for the EVO. it will save you in the long run and you will get the look you want with the new rig.

On another note... does anyone know if the EVO bumper would still work if he switched over from Poison Spyder since there is cutting involved on the frame rails?
 
M_Savage said:
just save up for the EVO. it will save you in the long run and you will get the look you want with the new rig.

On another note... does anyone know if the EVO bumper would still work if he switched over from Poison Spyder since there is cutting involved on the frame rails?
Click to expand...

This is an old thread that was bumped by someone else. Brankz didn't ask the question.

The EVO would not be direct bolt on if you already had the poison spider. It would need some fab work.
 
You must log in or register to reply here.
Top Bottom