Close

Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Been Around the Block tgoss's Avatar
    Join Date
    Jan 2016
    Location
    CA
    Posts
    464

    FS: Dynatrac Axles, Evo Enforcer, KMC's with 37" STT Pro - San Diego

    I feel it's time to at least throw this stuff out there for anyone looking to upgrade their rig for the summer. This set up has been under my rig for about a year... some components less than others. It all works, FLAWLESSLY despite some of the cosmetic flaws as it actually does get used.

    These will be available in the coming weeks. Hopefully sooner than later for my sake.

    Dynatrac ProRock44: $4750. These will be offered as complete brake to brake assemblies. Both of these axles have just been serviced and refreshed in December so EVERYTHING has been replaced internally besides the carriers and housings (I used to run 5.38's... moved to 5.13's and replaced all bearings and seals as well as shafts, knuckles, ball joints.... etc.)

    ProRock44 Unlimited Front Housing:
    Rubicon E-Locker
    5.13 Yukon Ring and Pinion
    300mm RCV Shafts
    Reid Knuckles
    Dynatrac ProSteer Ball Joints
    New Timken Unit Bearings
    Custom BEEFY AS FVCK raised track bar bracket with tabs for steering ram.
    Teraflex Big Brake Kit
    Tabbed for limiting straps
    Adams Driveshaft Include!







    ProRock60 Semi Float Rear Housing: SOLD


    Suspension Components:

    King 2.5 Shocks, Evo Mfg Spec - SOLD

    King Front Air Bumps - SOLD

    Evo 4" Plush Ride Coils - $300 Again, scratched here and there. Work flawless.

    Evo/Currie Control Arms - $950 Again, scratched here and there.... Work Flawless. (Evo front lowers, Currie everywhere else. No, I'm not picking them apart this is a bargain for all 8 arms.)

    KMC Machette Beadlocks (17x9, 3.5 backspace, 5x5 bolt pattern) with 37x12.5 Cooper STT Pros and OEM TPMS Sensors - $2500 Custom powder coat candy red on the centers, will include my locking lug set as well (roughly 5-6k miles on these. Rotated once. I'm not exactly kind to them but lucky for you it gives you street cred at the mall... ) I'm really not interested in pulling these apart so hopefully someone will just grab them as is, they are pretty awesome.



    Everything listed is a net gain to me.... Add paypal fees or shipping if you want to go that route.

    Everything is located in San Diego and as stated earlier.

    PM me and I'll give you my cell if you want to chat about anything. Keep in mind I feel I've fairly priced everything so if your intent is just to offer lower, just don't. Thank you.

    I feel confident in the next 2 weeks everything will be off the rig and I won't be wheeling anymore until I complete my next build stage so no more trail use will be on them.

    Thanks for the space
    Last edited by tgoss; 04-26-2017 at 05:00 PM.

  2. #2
    Old Timer Napalm's Avatar
    Join Date
    Jun 2012
    Location
    Flint, TX
    Posts
    4,722
    Nice stuff! Good luck with sale, man!


    Sent from my iPhone using WAYALIFE mobile app

  3. #3
    Hooked Fridge81's Avatar
    Join Date
    Apr 2013
    Location
    Yuma, AZ/ Imperial, CA
    Posts
    219
    Very nice! GLWS


    Sent from my iPad using WAYALIFE mobile app

  4. #4

  5. #5
    Knows a Thing or Two mo0s3's Avatar
    Join Date
    Jul 2015
    Location
    So Cal
    Posts
    646

    FS: Dynatrac Axles, Evo Enforcer, KMC's with 37" STT Pro - San Diego

    Im interested in the tires and rims , let me know when you take them off and ill drive down from riverside and grab them from ya !
    My contact information
    Steven
    702-677-8612
    Im located in so cal


    Sent from my iPhone using WAYALIFE mobile app
    Last edited by mo0s3; 04-19-2017 at 11:44 PM.

  6. #6
    Knows a Thing or Two RockinAZJK's Avatar
    Join Date
    May 2016
    Location
    Flagstaff, AZ
    Posts
    576
    I definitely would like those airbumps. I'd be interested in the front axle depending on when it's ready, and interested in the wheels as well!


    Build Thread - "Jenny"
    http://wayalife.com/showthread.php?4...=build%20jenny

  7. #7
    Nothing but a Thing jesse3638's Avatar
    Join Date
    Sep 2012
    Location
    Apple Valley, CA
    Posts
    1,920
    Had I not bought a new vehicle I'd be very interested in the axle set-up. It's also mean I'd need a compressor and a few other odds and ends to go with them. GLWS

  8. #8
    Been Around the Block Mybadjk's Avatar
    Join Date
    Dec 2016
    Location
    Elko
    Posts
    396

    FS: Dynatrac Axles, Evo Enforcer, KMC's with 37" STT Pro - San Diego

    Curious on price for just the pro rock 60? Price on just the kmc wheels? (If no one buys them complete. )


    Sent from my iPhone using WAYALIFE mobile app

  9. #9
    Been Around the Block tgoss's Avatar
    Join Date
    Jan 2016
    Location
    CA
    Posts
    464
    Quote Originally Posted by Napalm View Post
    Nice stuff! Good luck with sale, man!


    Sent from my iPhone using WAYALIFE mobile app

    Quote Originally Posted by Fridge81 View Post
    Very nice! GLWS


    Sent from my iPad using WAYALIFE mobile app
    Thank you guys.

    Quote Originally Posted by benatc1 View Post
    PM sent on shocks/bumps

    Quote Originally Posted by mo0s3 View Post
    Im interested in the tires and rims , let me know when you take them off and ill drive down from riverside and grab them from ya !
    My contact information
    Steven
    702-677-8612
    Im located in so cal


    Sent from my iPhone using WAYALIFE mobile app

    Quote Originally Posted by RockinAZJK View Post
    I definitely would like those airbumps. I'd be interested in the front axle depending on when it's ready, and interested in the wheels as well!


    Build Thread - "Jenny"
    http://wayalife.com/showthread.php?4...=build%20jenny
    Replied to you both.

    Quote Originally Posted by jesse3638 View Post
    Had I not bought a new vehicle I'd be very interested in the axle set-up. It's also mean I'd need a compressor and a few other odds and ends to go with them. GLWS
    Yeah it's great upgrade but definitely one you'll need a few here and there's to get it up and running.

    Quote Originally Posted by Mybadjk View Post
    Curious on price for just the pro rock 60? Price on just the kmc wheels? (If no one buys them complete. )


    Sent from my iPhone using WAYALIFE mobile app
    I'd split them for $4750 for the PR44 and $3250 for the PR60 both including their respective driveshafts.

  10. #10
    Guy with a Red 2-Door cozdude's Avatar
    Join Date
    Mar 2013
    Location
    West Chester, PA
    Posts
    15,907
    I'm sure the air bumps are spoken for at this point but I would like to be next in line please
    October 16, 2013, wednesday early evening, east of the pacific ocean, selectee for truly random and boring Parking lot photo of the moment grand platinum prize winner!

    2011 JKS
    EVO Bolt-on Coilovers, EVO 1/4 pounder w/ stinger, 37" Cooper STT Pros, PR44, and some EVO stuff

    Awaiting install-
    On Order-
    Want list- Evo carrier and skins, PSC hydro assist



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •