When 100% properly installed there should be no rattles! If you're still experiencing a rattle let us know where it's coming from, during what conditions, and you could even send pictures or video if you would like We want to help you install this product in the best way possible!
Cbach1987: In one of your pictures it looks like the carrier body may be tilted slightly away from the body of the vehicle instead of toward it. This may be where your jingles are coming from. That little zinc coated plate (looks yellow) must be far enough out that it presses onto the rod (or loop) that goes into the opening. Also you may want to adjust the top rubber puck (slightly inward) and then use the thumb screw (on the the release latch) to adjust it in until it presses on the puck again.
Last edited by LōD Offroad; 01-13-2017 at 01:44 PM. Reason: Hiccup
Thanks for responding!
Hey, we're here to help! The yellow plate may not need to be all the way out, if it is out that far, your carrier arm may not be close enough. The carrier arm plate DOES need to be slightly tilted towards the vehicle as stated in the instructions. Just having it level may not allow enough pressure by the guide rod on the yellow plate. Keep tinkering!
2014 JKUR "Stumps"