Search results

For those of you with the Lux kits, was the 8pc enough or did you supplement it with additional? I was thinking 1 in each fender well, 1 on each side and 1 front and rear with the sides / front / rear being kind of centered. Thanks!

I'm coming off of several sets of Trail Grapplers and a few MTR/K over the years and figured I would try KM3s this time around. I have now had them on 2 sets of wheels and while the KMCs are better than the steelies they started on, they still have a pretty nasty hop to them Anybody else...

Hey all, I am looking to put the portable compressor I have, hard fixed under the passenger seat. I was hoping to find one of those amp shelves that would mount to the seat base frame, but the ones I see say 4" of clearance for height. The compressor I have needs 4.5-5" (it's big but fills 37s...

Any idea when the raw version will be back in stock?

Hey everyone, I am going to get some beadlocks in a few weeks and since nobody will mount them and I have nothing else big enough to carry the currently wheels and tires to have them broken down, I will have to do that myself. I have watched some videos of this process and I actually do my own...

Wondering if anyone has experience with putting together 17x9 KMC Hex 37x12.50 BFG KM3. If so, are the beads the right size for that wheel or were different bolts / shims needed? Thanks!

Hey all, Thoughts on the PSC SK284 - BIG BORE XD2 Overlander Steering Kit without the ram if I am planning on sticking to 37s? I'm sure the ram is great, but would it just add complexity to a system that doesn't really need it? The Jeep is a weekend-er and spends a fair portion of its time on...

Hey everyone. I have developed a very slight leak on my trans but it seems to be in an odd spot best I can track it down. It's almost like its weeping from the right in front of where the trans bolts up to the t-case. Has anyone seen a similar leak, if so what was the cause / resolution...

Recent chatter about "race radios" led me to pick up a couple handhelds. They seem pretty nice and got me going on researching hard mounts. So with CBs, you make sure that the mount is well grounded, including griding paint and powder coat off crucial areas and running ground straps, then...

My last JK was not a Rubicon so I had manual disconnects and never had to ponder the following. I know in general, sway bars should be relatively level when sitting still and flat. Mine is currently like this with the slightly extended end links that came with my 2.5" kit, but I see a lot of...

Are you Hard Rock / 10A / Etc.... bumper people removing the metal air dam? If so how are you protecting the disco motor? My last JK was not a Rubi so I didnt have a disco to protect and that plastic version of the damn was gone on day 1 or 2. Thanks!

Hey everyone! Starting this late as it is kind of the end of this stage, with more to come I'm sure (as it always does!). This is my second JK that I picked up right before a move from Atlanta to Las Cruces NM. My last JK was a silver 2 door that I let go several years ago and have been...

Just finishing a round of upgrades and the drag link & tie rod are really all that is left (for now... hydro assist will come summer time once the budget recovers). Barnes seems to get decent reviews in various places and that have a sale right now. Any thoughts on the aluminum kit from them? I...

Just thought I would post up in case anyone was wondering about the lack of clearance on the factory Hard Rock sliders, you can increase it almost 2 inches by trimming back to the weld for the tube. The sliders actually seem well built, so I figured I could save a few bucks keeping them for now...

Passing some time and miles after some upgrades, decided to check out the trailhead for the Robledo OHV area. I recently moved to Las Cruces and have been scouting the area as I was building up my new to me '15 JKUR. Went in a little ways and decided to turn back so I wouldn't be tempted to...

Taking it easy on Thanksgiving morning, hit some dirt roads trying to pass those gear break-in miles. Took the RC along so I could wheel something at least!

Hey! Long time Wayalife video fan (since ~2010) and after getting rid of my last JK in 2012 I have been Wrangler-less since (2x GC in there including a Trailhawk), until this year. A move to Las Cruces NM this past Sept. meant it was time to go Wrangler again! Traded my GC Trailhawk in on a...