Search results

  1. monstrousmac

    OK stupid question on wheels

    I currently own ATX Slab Beadlock wheels. Unfortunately I had one of my wheels damaged due to vandalism. the specs on them are as follows: Brand: ATX Wheels Backspacing: 3.5in Bolt Pattern: 5x5 Color: Satin Black w/Silver Lip Material: Aluminum Offset: -38mm Qty: 1 Size: 17x9 As we all know...
  2. monstrousmac

    1 ATX Slab Beadlock 17x9 5x5 (5x127)

    Hi All, I am looking for 1 ATX Slab Beadlock 17x9 5x5 (5x127) . I had someone vandalize my Jeep and loosen my lug nuts on my passenger side front tire. Needless to say it caused a stud to break off and the other studs had did some damage to the stud holes in my rim. I literally had on lug nut...
  3. monstrousmac

    Important!!!! New offroaders please review for your own safety.

    Eddie if this in apporpriate post please let me know, but I think it is very important and could save someone's life. Especially, since someone has already lost their life here in Arizona with his wife and kids in the car at the time. This was a a situation that started with good intentions of...
  4. monstrousmac

    Jinxed Myself

    Well, about a week or so ago Eddie and I were responding back to a Wayalife Member on his post on RCV axle Shafts. I said they are a pain in the butt and a lot of maintenance, plus the boots crack often. I also stated the the RCV shaft are incredibly strong and now you transfer your weak point...
  5. monstrousmac

    Coil Springs and Shock Combo

    I was wondering if you all thought the EVO Plush Ride Coil Springs and Rancho 9000XL Shocks would be a good combo. I know comfort is subjective, as Eddie would say. I currently have the Rock Krawler 3.5 inch Triple Rate Coil Springs with Bilstein 5100s. I need to replace the shocks, they have...
  6. monstrousmac

    Finally put in my new axle shaft

    Well, finally got my driver side rear axle shaft swapped out. I had a bad seal, it was leaking a little. So, I bought a new complete axle shaft with a spare seal and bearing kit for the shaft I pull out and keep it as a trail spare.
  7. monstrousmac

    EVO Hinged Tire Carrier

    Well, I got my EVO Tire Carrier installed and the rear Fascia. Now I just need to swap the rear dri er side axle shaft. I have a slight leak. So I ordered a new shaft and a spare set of bearings and seals for my existing shaft to use as a trail spare.
  8. monstrousmac

    Radios in Jeeps and on the Trail

    Question I have a CB in my Jeep now, but I notice a few people running GMRS radios. Which do you all prefer?
  9. monstrousmac

    Construction coming along

    Well, I have been adding an addition to the house. It is coming along. Next is my bigger shop with at least 4 to 6 bays with a lift. Here are a few shots of the construction
  10. monstrousmac

    Coolant leaks

    Man it has been a pain with the coolant system, granted I have 241,762 miles on my 2010 JKU and it has been running great, except for gaskets and hoses leaking. So, at about 220,000 miles my radiator went bad, the plastic tank finally blew on the side, no big deal replaced the radiator. Then the...
  11. monstrousmac

    Front ARB Locker Air Line

    Hi all, Need some advice. I am trying to figure out how to route my front ARB Air Line off my front axle. I have a Dynatrac Pro Rock 44. I mounted my twin ARB air compressor under my front passenger seat. I am using Russell Steel Braid Air lines. The rear was actually pretty easy. I ran it up...
  12. monstrousmac

    Any body ever hear of CAVFAB

    Has anybody ever heard of the company CavFab? I saw one of their Tire Carriers today. Just curious, because I have never heard of them before.
  13. monstrousmac

    ARB Twin Air Compressor Help

    So, I have everything set up on the bracket that is going to go under my passenger seat, but ARB updated their solenoids. Does any one have experience with them there are two ports labeled (1) and one port labeled (1). Does this look like it is setup correctly?
  14. monstrousmac

    Found my Evap Problem

    So, I finally found my Evap problem, p0456 and p0457 code. I will let the pictures talk for themselves.
  15. monstrousmac

    PSC Big Bore XD2

    Hi all, So, I have a question. Can you install the PSC Big Bore XD2 without installing the new reservoir and pump? I plan on eventually adding those parts but not right now. I have spent a lot of money on my Jeep in the past year and have a lot of other projects going on. I just bought new...
  16. monstrousmac

    Valve cover gasket

    Unfortunately while changing a valve cover casket on the passenger side one of the bolts snapped of flush. Currently I put the other seven in and torqued them. Luckily the one that snapped was in the middle bottom. Easy to get to and easy to keep an eye on it. These are a pain in the rear to...
  17. monstrousmac

    Bone to pick with you all

    Who ever is driving around and buying all the darn 10mm sockets and wrenches need to knock it off. I went to Lowes,, Oriellys and Home Depot and not one 10mm anything. As Liam Neeson said in Taken, "if you are looking for ransom, I can tell you I don't have money. But what I do have are a very...
  18. monstrousmac

    Tires

    I wanted a few peoples opinion on tires, here it goes: I need new tires. I am looking at the NITTO RIDGE GRAPPLE R38 X12.50R17 . If I purchase them it will be through Discount Tire for 551.00 dollars a piece for a grand total of 2,815.52 dollars after taxes and discounts for 5 tires. I was...
  19. monstrousmac

    2014 Rubicon low mileage for sale

    Hi all, I am selling one of my Jeeps, a 2014 Rubicon with very low mileage. I am asking 28,000 dollars. Here are the following specs and pictures" 2014 Jeep Wrangler Rubicon VIN: 1C4BJWCG2EL246068 Exterior: Anvil 3.6L V6 CYL 24V High Output 6-Speed Manual NSG370 Transmission 4.11 GearsLeather...
  20. monstrousmac

    Stay The Hell Away

    So, the other day I was driving down the road and it started to rain here in Tucson and my Jeep started to act up electrically. The engine started to run super rough, I was getting the general misfire code P0300. I had dash lights going on and off. I did not know if I was going to make it home...
Top Bottom