Search results

So my rear pinion bearing is going bad. I hope the dealership warranties it but doubt it with the mods and running 37 inch tires. I called 4wheel parts to get a quote to see about fixing it. They want to do a master kit so total it’s going to be about a 700 and change job. Would you recommend...

Started last night if I’m at a stop and I take off hard it starts to flash all kinds of lights on the dash. Any ideas. I’m thinking maybe loose battery cable. It doesn’t do this every time it’s sporadic. Sent from my iPhone using WAYALIFE mobile app

Has anyone installed factory fog lights on a quarter pounder? I have some JW Speaker fog lights and was looking at getting the EVO Quarter Pounder put really didn't want to give up these fog lights. Thanks. Sent from my SM-G955U using WAYALIFE mobile app

Started getting a pretty good vibration when I start to accelerate above 30 mph gets worse the higher speed I go till about 70 then starts to be less. I'm running 37s do have aftermarket ball joints and 1350 Driveshafts. Have not gone wheeling since I put the lift on with the upgrades. I do...

I wanted to wire up my A-Pillar LED lights to my fog lights to use the stock fog light switch. Has anyone done this before and what did you have to do to do this? Thanks for the help. The fog lights I have are the JW Speaker LED fog lights too. Sent from my SM-G955U using WAYALIFE mobile app

The front sway bar is hitting the frame. Any thoughts on what I should do ? Don't have much room to move it over without the other side hitting the frame as well. I attached some pictures. Also I think the sway bar link is mounted incorrect on the bottom am I wrong on this? Thanks for the help...

What is the bolt size for the front sway bar links? Thanks! Sent from my SM-G955U using WAYALIFE mobile app

Got the Jeep back today and I must say I'm really impressed. Loving the Evo coilovers. Best decision if anyone is thinking about going this route. Like to thank the guys at SCL Automive for awesome work and the wife for always supporting me with my Jeep build. She's one of a kind! Sent...

Go the lift installed and at full drop the drive shaf is hitting the exhaust crossover​. Does anyone have this issue to? I have the Enforcer Pro Stage 2. What can I do? I have Adams 1350 Driveshafts. Thanks. Sent from my SM-G955U using WAYALIFE mobile app

What did people use to fill the holes on the bump stops on the spare tire carrier? Thanks. Sent from my SM-G955U using WAYALIFE mobile app

Do you need an exhaust drop spacer for a 2013 2 door when putting on the Enforcer Pro coil over system? Thanks for the help. Sent from my SM-G955U using WAYALIFE mobile app

Getting the Evo coil overs put on. Around what lift height should I be setting them at to be running 37 Nitto Trail Grapplers? I have XRC fender flares. Thanks. Sent from my SM-G955U using WAYALIFE mobile app

Hey guys! Does anyone know of good trails in northern New Mexico southern Colorado? THANKS! Sent from my SM-G955U using WAYALIFE mobile app

Picked up my 2013 2door 10 Anniversary Rubicon last week completely stock had only 24k on it. Got a long parts list waiting to be put on. Figured I'd put together a thread this time around. Waiting to be installed: Suspension-EVO MFG ENFORCER PRO STAGE 2. wheels/tires-37inch inch Nitto trail...

Just got this lift and and was searching for a write up does anyone have a link to it been searching for about an hour and can't find one. Thanks for the help. Sent from my SM-G955U using WAYALIFE mobile app

Hey guys I'm going to be putting 37s on soon. Was going to mount them on the stock Rubicon wheels. Went to discount and they won't mount them has anyone else ran into this problem? Will they not fit right mounting them on the stock Wheel? Was going to save for beadlocks. Thanks for the help...

I'll be installing the EVO Enforcer Pro next week should I get the C gussets welded on first or after or does it matter? Any info would be great. Thanks Sent from my SM-G955U using WAYALIFE mobile app

Hi All, I'll be picking up a 2015 Rubicon 2 door Friday and will be installing EVOs Enforcer Stage 2 lift along with Adams 1350 driveshafts front and rear running 37 inch Nitto Ridge Grapplers and EVO bumpers front and rear. My question is I will be putting on EVOs C gussets and aftermarket ball...