Search results

Welcome to Wayalife and the world of Jeep off-roading. There are quite a few knowledgable and helpful people on here.

I am not familiar with the Yukon Differential covers, but if it was just that, I would question the work that was completed on the fill of the differential fluid. Clearly it was overfilled. Maybe a call to Yukon to see if the capacity changed with the different cover? The problem will...

I would think that you are fine then. The photo, for some reason, only shows about 2 teeth, and from what I can tell, it looks like a good pattern to me. As for the noise, all I can say is, welcome to the wonderful world of Jeeping.

Do you have any photos after applying gear marking compound? Maybe the gears themselves are not meshing correctly? What kind of pattern are you seeing? Sometimes the noise is normal and the gears will wear in, but it could be indicating a bigger problem in which your gears might not be wearing...

Do what you must.

Nope, not me. But thank you for the warm welcome Adam.

I have only purchased one lift kit and that was from EVO MFG. I have no regrets. They have thought of everything... with the exception of installation. While I had the work done by professionals at Off Road Evolution, I have installed other modifications from EVO MFG and it can provide any...

You are not alone Eddie. I cannot figure it out myself also. My wife was asking the same thing the other week and yeh, it seems they should just double the height of all flag poles and create a new normal. That way the flag can fly at proper height again. Don't get me started about burning flags.

I had the GenRight carrier and it was mounted on the body. Not very sturdy so I went over to the EVO MFG tire carrier. I can seriously have off that carrier without worry and it also helps protect the rear passengers in the awful event of a rollover.

Do you suspect that the same thing would have happened had you done the same route with the EVO body mounted carrier?

Sounds like you got everything figured out. Good luck with the hinged carrier and let us know your thoughts after you have used it for awhile. Sent from my iPhone using WAYALIFE mobile app

Heylo, So I notice that my front pinion yoke has a bit of play side to side (the pinion itself is fine). I have the Dynatrac ProRock 44 running 5.38 gears which is coupled to a JE Reel 1350. So I need to retighten the pinion nut. Does anyone know what the general range is for the pinion nut...

Hey everyone. So I have had the EVO MFG Tire carrier mounted on the EVO MFG Rear Corner Rockskins for about 8 months now. Unfortunately, the tire carrier still rattles. I have tried the offset on the pin side in which the tire carrier is essentially twisted to provide force against the opposing...

It is great when you get to use your equipment, confirming and supporting your decision in making that kind of investment. I would always question the money I spent on something until I actually used the safety recovery equipment and lockers and after their usage, thank god that I went that...

Another great video Eddie and Cindy. Thank you for all of the hard work and the sharing of your experience. One day, I will get to Moab.

Hey friends. I have been so busy with bow hunting that I did not have time to post this, in the hopes that it might help someone else out there. My problem was that when I started my 2016 Jeep Rubicon, the check engine light was on and the automatic transmission would not shift out of 1st gear...

Please review this graph showing the used 2012 to 2017 used car sales data: As you can see, and while the graph only shows the last 6 months, how very little the JK as a vehicle loses its value. I would opine that the JL is a risk that has not proven itself yet and therefore, better to get...

Thank you Eddie. Sometimes the obvious answer is the best answer. I figured that there is always something limiting our flex, whether its the sway bar, the shock springs, the frame, the bumper stop extensions, etc. Remove one obstacle, another gets in the way. The question now is how much do...

Thank you Strike Force Zebra for the giveaway. Wish me luck!

Great fun by all So our unnamed trail/route run was a huge success. We had 7 rigs that last the parking lot at around 8:15am and we were able to finish the entire route. I am very proud and happy that everyone drove so well. The weather was perfect. The trails were in good condition, with the...