Search results

It’s been a couple months now my Jeep has been broke with a blown motor from it overheating. So I sent it to the dealership and had them install a new motor, in the process they claimed my torque converter was damaged by a rock that got in even tho I didn’t experience any issues. So I had them...

So as some of you know I’ve been having over heating issues with my Jeep, I replaced the thermostat and everything was fine for a couple of weeks then it came back with a vengeance. I was driving to jersey my Jeep completely overheated and before I even get the opportunity to pull to the...

Last night my Jeep started to over heat while I was on the thruway I continue to drive for a carefully to reach the next exit so I can pullover but but my motor dies and I was forced to pull to the side. I waited a hour before I attempted to start it so it can cool down and it just cranks and...

The past week my Jeep will start to overheat after 10 min into driving and randomly get back down to normal temp for a second then temperatures go right back up. I check the coolant reservoir and it is filled to the top which I did not add that much. When I checked the level in the radiator it...

So I took my buddy to rausch yesterday so he can finally wheel his new setup and for the most part it was a success. I did get stuck for the first time on tombstone slid off a rock and went up against a tree and my front and rear diff got caught in between rocks. Also my sway bar rotated...

I just installed a bds 3inch in my buddies jk and I have to say it is a stupid simple lift to install, if you are only looking for the bare minimum and looks. I actually don’t think the kit is appropriate if you plan on building up your Jeep and wheeling often. They use spacers for the rear sway...

Sent from my iPhone using WAYALIFE mobile app

So I haven’t even solved the axle seal leak and a new problem came up. Today I started up the Jeep and the wipers went on for 2 seconds and turned off. I found that odd but didn’t pay mind to it. Then when I tried to put my music on my stereo was acting up it is an aftermarket one but never had...

So I’m going through a little problem. I changed the seal and bearing with two new sets since I originally posted and the seal is still leaking and it has gotten worse. Any ideas on what the hell is going on? Sent from my iPhone using WAYALIFE mobile app

So after 4 years and a shit ton of upgrades I finally pulled the trigger on one of the most basic upgrade. a fresh pair of truck lite for the Jeep and I love it. Sent from my iPhone using WAYALIFE mobile app

It was easy removing the old ones I just cut them off. I took my time to make sure I don’t touch the shaft. Sent from my iPhone using WAYALIFE mobile app

After sitting and thinking how can I press the seal and bearing while waiting I went to Home Depot came up with this high tech device and beat the thing till it went into place and I was able to finish the job. Feeling proud Sent from my iPhone using WAYALIFE mobile app

I got me teraflex 60s about a year ago and been pretty satisfied with them but about 6 months ago I noticed my rear driver side axle seal leaking a little. It wasn’t much so I ignored it but now it is leaking pretty bad where you see it dripping from the dust shield. I don’t think it is normal...

A few I had tonight, that Grimm was amazing. Sent from my iPhone using WAYALIFE mobile app

I get more flex from the front Sent from my iPhone using WAYALIFE mobile app

I didn’t have any pics of the rear at full flex somehow so I used my old 40’s thankfully they were still mounted on the old rims so I flexed on those. Sent from my iPhone using WAYALIFE mobile app

I recently did the rebel extreme coil over conversion and have a issue I can’t figure out. After the conversion I flexed out my Jeep a few times but noticed that I am not able to stuff my wheel as much as before About 3 inches difference, and my down travel is kind of upsetting. There is a lot...

The past week my steering has been sloppy, there has been a lot of play in the steering wheel and always have to work it while driving. I had someone turn the wheel back and forth as I checked all the ends and everything looked good except for my drag link end where the pitman arm is. I’m not...

I have a 14 Jku and a list of codes came up with speed sensors with the rear left wheel, front left wheel (changed a month ago) and a transfer case speed sensor. I can’t find any videos or write ups with the transfer case speed sensor if anyone has a write up or information on this I really...

Ok so my coil overs came in today and I noticed that the stop ring are a few inches from the top which dosent seem right. If you guys have any pictures of where you have yours set or any insight to where I should have them set? Sent from my iPhone using WAYALIFE mobile app