Search results

Pretty sure one of my rear axle shafts is busted because I can hear it scrapping the axle housing. I will be tearing it down this week to access the damage but wanted to get some thoughts on what other problems I may have. Here are the symptoms When I put the jeep in 4hi I get no power to the...

Looking at a 3" enforcer kit. The Kit does not include an adjustable front track bar. Would you recommend that I add one? 4dr jk. 35" tires Sent from my iPhone using WAYALIFE mobile app

I am installing the synergy drag link and adapter with no success. Drilled out my oem knuckle w to 7/8 with a step bit. Installed the synergy tre adapter. Had to give it a light tappy tap to get it in. Installing the tre did not go so well. Would not push into the adapter easily so I put an...

So recently I had new rear shafts put in my rear d44. While doing the R&R we found that there was a lot of mud that had gotten into the ebrake and tone ring area. After thorough cleaning and everything was back together I had an abs and traction control problem that led me to replacing the...

I was hoping someone here would be able to give me an opinion on a fair price for a OEM front d44 rubi locker, stock axle shafts, 488 R&P. It will come assembled in the housing, but the catch is that the axle housing is no good, i would essentially just remove the shafts and internals and put...

So while trying to remove the pitman arm I managed to damage some of the threads on the sector shaft. Has anyone had this problem and were u able to repair the threads.

So I won a synergy drag link flip and tie rod in a raffle and I am wondering if it will work w my RK track bar bracket. Can anyone give me some advice.

During the installation on my PS bumper 2 of the studs just started to just spin in place. I contacted PS and they said that the stud is just a carriage bolt w a keeper on it and I need to take it off and reseat the keeper. My problem is that the nuts are nylock and they are already somewhat...

My front passenger side sway bar link is hitting my spring perch as I go over bumps and into my driveway. The driver side is not hitting but is very close. The angle of my sway bar is 17 deg. 15 jku 3.5 rk X factor. Any suggestions .

When my rear axle is at full droop my e-brake cable is under alot of tension. What should I do. Get a relocation bracket, reroute it, or just let it hang

I am hearing a noise which I am sure is coming from the rear axle. Most noticable between 20-40mph during light acceleration and then letting off the gas. To me it is the sound of a bearing. I can hear the sound change as it decelerates Any suggestions as to what it would be. I did have my...

After removing my duel steering stabilizer and going back to a single. I now have noticed that I have bump steer when driving over small bumps in the road. Is there something I need to look into that would cause this or is my single just not gonna be enough?

Anyone have experience w this system. I know u usually get what u pay for. I am looking for an affordable system to replace the stock muffler. Need some clearance for my rear sway bar.

So my front 1310 driveshaft has been making some noise. I greased it up and it went away for a bit. Now after a wheeling trip it is worse and got a vibration at about 60. I am pretty sure i need to replace the cv yoke/ball. Anyone have experience at this? Is it worth paying a shop to do it or...

I am having some clearance issues with my sway bar disconnects and was wondering if anyone had/has the same issues

So I installed a full set of Rock Krawler control arms on my 15 jku that already has a 4" lift. Now my rear sway bar links contact the axle so I need to move the sway bar back. My question is if I move it back will it clear the stock exhaust?

Finally taking the time to make my first post. My 2015 jku 4"rc lift, aev geometry brackets, tatton 1310 driveshafts, G2 488s, synergy assurence kit, mt baja mtz 35s on 17in procomp rockwell, dv8 front bumper, smittybilt xrc 10k winch, rock hard oil pan skid, wayalife winshield sticker in the mail