Search results

Took off the steering linkages to paint them and trimmed the bumper. I found out where the Hornets were coming from.

Pictures for the previous post

Already have a new list of things to do one the buggy. Trying to get all the simple things done before next payday. Flipped the steering bolts, if I loose the nuts the bolts won't fall out now. One of that shops suggestions.

Thank you. They found a few things. I didn't put a spacer in my new master cylinder, frame clearance for the front upper control arms, front bumper needs to be trimmed, steering bolts should be turned, and a few welds I forgot. I never would have figured out the I forgot the master cylinder...

Thank you. I'm really excited.

Got the buggy back today. Really happy with what they did. Already have a new list of things to do. All that I need to drive it is, transmission crossmember, drive shafts, transmission shift linkages and the transmission to work.

Got the buggy out of the garage. I loaded it up to take it to a local custom shop to have a few things done to it. I'm having them plumb the radiator and while it's there do granny lines, fuel lines and an in fuel cell pump. The shop will give it a good look over and let me know of any issues...

Thank you!

Got some work putting brake line clips on the trusses. Got the hydraulic lines routes through the front truss, pretty tight though.

Thank you :)

Built some hydraulic lines and modified the orbital valve support bracket.

Power steering heat sink is mocked up. I used 2 pieces of 2" square tubing to make the mounts. They don't connect, only long enough to support the cooler, maximize air flow and cooling.

Parts are coming in. Brake and steering plumbing parts. Had enough to start on the rear axle, still waiting for the rest to show up.

The steering column was too high. I took a piece of 2x3 tubing and made a spacer to drop the wheel. Welding kinda sucks with a splint on...lol

Thank you. Needed a break from working on the buggy.

Welded a plate to the roll cage and made it so I can remove the battery box. Bolted in the battery box and put I my new battery

Got a new battery box and battery. Getting them mocked up.

Installed a hood louver to help remove hot air from my engine bay. If it doesn't work I have a few other ideas.

I made and welded in some fuel cell mounts. Drilled and tapped mounting holes

BABOOZLE have me this sway bar to see what I could do. It took a while to figure out how to take it apart without destroying the whole thing. Finally took the short half to work and put it in the arbor press. Got that half apart, the other side should be the same. From what I can tell a new...