Search results

  1. run2jeepn

    38's - Are They the New 37?

    I voted YES. I ran 36's and 38's TSL SX's on my old YJ. But when I ran them really only tire brand anyone ran was TSL's. A few already make 38's Toyo, Geolander, Patagonia......... My Problem is my choices get even slimmer running 18in wheels. Wish I had 17s.
  2. run2jeepn

    Run2jeepn's JKU Build

    Got the Ole Jeep out and went Fishing.
  3. run2jeepn

    Destroyed front LCA brackets. But what else?

    How's your Track bar look? I have one a member sent me. Before it arrived a found one local. So it's still seating in the box it came in. If you need it. It's yours. I hate to mention this, a hit that hard. You'll be lucky if that housing isn't bent too.
  4. run2jeepn

    Regearing? An age old question..But wait, there's more.. how's your oil filter?

    I think 4.56 would be the sweet spot for those tire sizes. I have a Auto on 37s. They are worn down. So closer to a 35in tire. I had 4.88s and it would down shift on every hill. I re-geared to 5.38s and its much better. I can hold lower RPMs on the hills without dropping and downshifting. At...
  5. run2jeepn

    Mishimotor Radiator Dead on Arrival

    Went through the same deal. Running a OEM replacement now.
  6. run2jeepn

    Run2jeepn's JKU Build

    Well a Driving a bit now. My MPG is 15.4 over 2 full Tanks of gas. Not to bad. Not any Different then it really was with the 4.88s. While the Jeep was sitting at the Shop. I picked up a fury friend. Found chewed up Papers in my Glove Box. Then a few days later. He got in my Work bag and got...
  7. run2jeepn

    Quarantine Trailer Project

    Awesome build
  8. run2jeepn

    Jeepers who workout, weights and gym thread

    Was big into Powerlifting for a while. Kind of slacked the last 2 years and haven't even lifted much. Life then excuses just got in the way. Competed in the 181lb Raw then 198lb Raw and Single Ply. I was a light 198lb. Never really had to drop weight much at the class. Local meets that's not a...
  9. run2jeepn

    Yachts to Kayaks. Boating thread.

    This was my winter Project. Picked up an old jon boat trailer for $50. Big advantage was this one came with Drop Spindle Axle that someone before me modified. So I bought a new U-bolt kit and Flipped the axle. Then did a SOA to it. Stripped it and used scraps of wood we had laying around. Bought...
  10. run2jeepn

    Bump steer issue

    Well my Alignment fixed everything. Drives like it should now. Besides my JKS Swaybar bushings are worn out. My Toe was way off. Chewed the crap out of my front tires in the short amount of time.
  11. run2jeepn

    Bump steer issue

    It was on the Jeep when I bought it. I've had the Jeep since Oct... Problems only started after swapping axles..
  12. run2jeepn

    Bump steer issue

    Ya I meant Caster not Camber. I measured my Wheelbase on each side. My Drivers side is 1/2in Longer. Passenger 117-1/4in Drivers 117-3/4in
  13. run2jeepn

    Bump steer issue

    So my Rubicon axles came from a 2015 and my old axle was a 2011 Dana 30. This picture is how my Rubicon LCA mount is. On the D30 the that slot you can see was open to make it adjustable. I have Camber in it. I adjusted my Toe today and made a quick drive around the block and it seemed better...
  14. run2jeepn

    Bump steer issue

    No their not adjustable.
  15. run2jeepn

    Bump steer issue

    New track bar is in. Everything is centered up now. Just have to get it aligned now. On my old axles LCA mounts. They had a Slot and my new ones don't have that adjustments. So I ether make a slot or get adjustable LCAs. Or I guess Geometry Drop Brackets. Not sure which is the Best way. It's a...
  16. run2jeepn

    Run2jeepn's JKU Build

    Got it back on the road good till my Alignment appointment on Tuesday. Traction Control goes nuts on hard right turns, bc my Toe is off. So I just turned my TC off. I may need to get front adjustable LCAs. I noticed on my old axles LCA mount. They had a Slot and the new Rubicon's just have a...
  17. run2jeepn

    Bump steer issue

    Ok I got the Jeep Back and swapped Track bars. I checked the angles and they are on with in a degree or 2 of each other. track bar and drag link. Took it for a test drive and did better. Still needs an alignment. My Toe is off. My Traction control light was still going nuts, but only on hard...
  18. run2jeepn

    Bump steer issue

    I did torque everything myself. I haven't had a chance to drive it myself thou. The shop specializes in JK Jeeps.
  19. run2jeepn

    Bump steer issue

    I bought the Jeep already lifted. I don't think it has a drop pitman arm. It looks factory.
  20. run2jeepn

    Bump steer issue

    No you read it right.
Top Bottom