Search results

You're welcome, happy to help. I'm sure that truck will live at my house a lot once it leaves yours... haha Sent from my SM-G950U using WAYALIFE mobile app

Haven't been able to work on the jeep a lot the past few days. A friend needed me to machine some wheel spacer. I bent a shock hoop And it wasn't quite how I wanted it. Didn't take the length of the bend in account when I cut the tubing and bent it too far and it's too tall, but that's an...

The spacers for the steering bolts are cut and installed with the heim joints welded the tie rods and let them cool installed them onto the axle Sent from my SM-G950U using WAYALIFE mobile app

Thank you. It's about time... haha Sent from my SM-G950U using WAYALIFE mobile app

The rest of the studs and nuts came today and I was able to mount the driver side high steer arm I cut tube, squared it on the mill and mocked it up. The front axle is very close to being finished. I'll cut spacers for the heim joints on the knuckle and weld together the tie rods. The upper...

I took the front passenger tire off, the kingpin spring housing off and mocked up a high steer arm. my son was a good help. drilled the hole for the bolt that puts it in double shear. just need to torque the nuts. I have more parts showing up tomorrow. Should be able the finish the...

My high steer arms came today, the nuts, bolts and studs are on they way along with the upper shock brackets and heim joints. started welding the roof of the role cage together. Had to get creative to have "floor boards" to make welding easier. Sent from my SM-G950U using WAYALIFE mobile app

I bit the bullet and ordered upper shock mount brackets, high steer arms and a set of heim joints. The arms and shock brackets were taking too long to make so I cut my loses and ordered them. While I'm waiting on them to arrive, I did some tube work on the roof. all ready to be welded in...

Thank you, it's getting deceptivly close to be done. Sent from my SM-G950U using WAYALIFE mobile app

Figured out where to mount the lower control arms so they're put of the way of the tires. They're tacked in place. started on tacking on the lower coilover mounts still need to finish fabbing the upper mounts and build the shock hoops. Sent from my SM-G950U using WAYALIFE mobile app

I cut off two tube adapters from my lower control arms and put them iin the lathe at work and turned off the weld and milled the flats back in them. I wasn't happy with the shock mounts I bought. So I'm machining them to work better. I started to make upper mounts as well. Another great...

Thank you. I knew I forgot something... haha. That's the old pinion frolm the rear axle. Sent from my SM-G950U using WAYALIFE mobile app

Things are getting exciting![emoji2] Sent from my SM-G950U using WAYALIFE mobile app

Yeah, everything fits well enough to move on to repositioning my lower control arms and building shock hoops. Once the notches are integrated into the role cage I'll go back and fine tune everything. Sent from my SM-G950U using WAYALIFE mobile app

My notches look pretty good with tires on. A little grinding is going to have to be done. The driver's side is a little too tight for comfort. The axle is set up for full compression. Sent from my SM-G950U using WAYALIFE mobile app

Check out coming up to speed with grubicon. He did a 1 ton JK and I'm pretty sure he got a bigger master cylinder. Might be the one you need. Sent from my SM-G950U using WAYALIFE mobile app

Thank you! The stock frame is two pieces stamped c channel, the outer is 3/16th and the inner is .100". Which is pretty thin. I had some 3/16" 2 x 6 rectangular tubing laying around and cut that up and tig welded it in. Some of the thin stuff was replaced with better material. I want to get...

driver and passenger side are fully boxed. The axle is ready to back under the jeep, all 2 tons of it, lol Sent from my SM-G950U using WAYALIFE mobile app

I know no one will ever see it, but something in me still wants it to look good. But there are more important things to work on. Sent from my SM-G950U using WAYALIFE mobile app

Almost done boxing in the frame where I had to notch it. I had to fill in a spot and it looks terrible, but oh well. Resurfaced another rotor, not too happy with the surface finish but I think it'll do. Driver's side Passenger side Sent from my SM-G950U using WAYALIFE mobile app