Search results

Using every inch. Did something new with draglink on XD 60 along with raising track bar pivot.

Complete EMT kit since she just finished school second in her class Sent from my iPhone using WAYALIFE mobile app

Everything is new with exception of coil overs which are near new. Upgraded nickel plated pivots, upgraded hardware, and complete. $5,000 gets it all. Includes Evo skid plates and Evo crossmember.

Don’t buy harbor freight, all imported crap. You’re essentially spending less on the torque wrench than the actual bolt your torquing. It may be calibrated when you first get it but it won’t be in six months. Buy USA Sent from my iPhone using WAYALIFE mobile app

Off my 07’ with 60k miles, box is in perfect condition. Was used on a daily driver and removed at the start of my build. $150 ship to CONUS. Sent from my iPhone using WAYALIFE mobile app

Bought new and only used for mock up, never had oil in it or pitman arm installed. $750 shipped to CONUS.

Had a couple hours to work today, got rear axle in and welded up rockstars. Cut off track bar bracket and got the Evo one tacked in place. Sent from my iPhone using WAYALIFE mobile app

Anyone have to clearance their Evo oil pan skid for the web on the prorock 60? I can’t push axle any further forward or the track bar will interfere with diff cover. Sent from my iPhone using WAYALIFE mobile app

Cycle, cycle, cycle. 60 is dialed in and have a good 6 degree pinion angle and 7.5 of caster. Going to move the reservoirs to top of frame and shorten driveshaft a bit. Sent from my iPhone using WAYALIFE mobile app

Started to install rosckstars last night on prorock 80 and ended up having to trim them fit around axle tube and milled the slots larger so the fit up nice and tight to dynatrac brackets. Sent from my iPhone using WAYALIFE mobile app

Is this bushing pressed in correctly on prorock XD 60? Just seemed a little odd sticking out but most of them look this way online Sent from my iPhone using WAYALIFE mobile app

Solved that problem, flag nuts the way they should be. Sent from my iPhone using WAYALIFE mobile app

I can’t be the only one that this has happened to. Lined up great, slowly tightened by hand and then it goes full taco. And yes I know it’s easier to weld it on but thought I’d bolt it up first and then stitch it on. Sent from my iPhone using WAYALIFE mobile app

Mcguard or Gorilla or what are you running on your prorocks. Looks like anything decent is 150 to 200 bucks. hex or spline?

How to unload dynatrac elite package, lol. The little Kubota was at her limits. Sent from my iPhone using WAYALIFE mobile app

Back to assembly. Sent from my iPhone using WAYALIFE mobile app

Sent from my iPhone using WAYALIFE mobile app

Anyone have and willing to share their top secret junkyard or insurance auction point of contact? Looking for a score like Eddie found. Needs to be a ultra low mile California escalade 6.2, gen IV or V. I am going to have Motec do the install and wanted to hunt down my own motor and trans...

Time to crimp steering lines, haven't made hoses in a couple years Sent from my iPhone using WAYALIFE mobile app

Finished this project about a year ago for customer. Cat C9 motor, 20" of wheel travel and just under 26,000 lbs. built from the ground up to his vision Sent from my iPhone using WAYALIFE mobile app