Search results

Just a few days back, my wife got me some nice Bday gifts for the Jeep! What a great wife, right? So I took the time to get em installed! The main piece was a no-drill MOLLE panel for the tailgate to clean up the trunk and get this better organized! The panel is from Overland Outfitters! It is...

Added a no-drill MOLLE tailgate panel from Overland Outfitters to the tailgate of TWSTR! Installation only took about 20 minutes and I am super happy with how it came out! And it really helped clean up my truck space, especially with a 2 DR JK and made a lot of things a lot more accessible!

Added on an AEV Winch Hook Isolator to the winch yesterday as well! Will keep the winch hook off the fairlead but allow me to suck the winch hook up nice and tight to the fairlead. And no more metal on metal contact there. It took me about 5 minutes to install. Just remove the pin holding the...

I even got to use my new winch out twice! The first pull was quite easy and probably was better suited for a snatch strap, but a bunch of us wanted to see it work, and the second one was actually quite a good uphill pull of a JLU with the rear diff hung up on a rock and all 4 tires dug in pretty...

Last weekend was our Fall Color Tour 2020 with the Wolverine Wheelers and we ended up with a pretty good turnout! We were probably a week or so late on peak colors in St. Helen, but still saw some good colors and had a bunch of fun as always! Even took my dad out on his first off road trip and...

Added a few new decals before Fall Color Tour 2020 with Wolverine Wheelers too! I of coarse had to add my latest ORV Permit and License! And then a new one on the rear window and my Storm spotter/HAM radio!

Then we get up to just a few weeks ago and are finally caught up! I got my winch installed on a custom hidden winch mount built by Unlimited Offroad in Fenton, MI. I been working a design idea for a while, but I don't have any welding experience, and this was not the project to try to start...

Unfortunately, with all the Covid stuff going on since March, I lost out on the chance for a few trips I had and didn't make it out too much this year. One of the big trips I was supposed to go on was down to Windrock in Tennessee, but unfortunately I missed that one...Hopefully I will get a new...

Since I broke my 4 Ft Firestik, I have been really happy with my 102" Whip for my CB, however I have been missing being able to run my TWSTR flag. Looking at my tire carrier antenna mount, I still had a hole left there that I could use, so I went and purchased a little 2ft Firestik to run in...

I also did a bit of work with the license plate too on TWSTR! Not big work, however even the little touches matter too! My license plate bolts were starting to get pretty rusty and I just hated looking as it, and especially that it was starting to leave a little bit of a rust stain down my...

Then it was time for Snow Flurry! And we still had a snowy fun bit of time running through Tin Cup Springs and Little Manistee trails around near Baldwin, MI.

After scouting, the wife decided we finally needed to get some seat heaters installed in the Jeep, so i also took the chance to add in some new seat covers too! I got a cheap set of Amazon seat heaters (not the worst, far from the best though) and some Bartact Seat Covers! This is definitely not...

Then me and a couple other Jeep from Wolverine Wheelers went out in January and did some scouting for our Snow Flurry run in February! We ran a few trails like Tin Cup Springs and Little Manistee and then made a run up north of Cadillac to some of those trails the next day as well! It was a...

Then for Christmas, I got a nice setup for the dash from my wife from 67 Designs and Ram Mounts! I got the 2 ball base with the carbon fiber arms and the Dam Adapters for Ram Mounts from 67d and 2 Ram Mounts X Grips, one for my cellphone and one for my tablet! Once again, install was super...

TWSTR got to have some fun after the fall color tour playing around at Rocks & Valleys ORV Park with the Wolverine Wheelers too! Found some good mud and some steep angles that day!

Then TWSTR got to have some fun in the St. Helen area up north in Michigan on the Wolverine Wheelers Fall Color tour! Nothing too complicated, a few good washouts, a little bit of rocks, and some tight twisties, but a fun day for sure! Here's a shot of me...

Next up in build order was a few more interior changes after Drummond! After a few days on the trail using multiple radios and such, I decided I wanted a dual radio mount and the wife decided she needed something better in front of her to hold her phone and some other stuff out on the trail to...

Well, you can't win em all, but sometimes you need to work within your budget and needs. It is still backed by Warn, and the support available to me from an American Company still played a big roll in my decision. While I always try to get America made products when I can, sometimes the budget...

The skid is not custom, actually had it on before the winch and it fit perfect with the winch mount. It is made by a company called Crawltek Revolution. As for the clutch handle, yes, I can easily release the clutch pushing through the skid plate and pull it back to reengage the clutch with no...

1. Warn VR Evo 8s 2. Price doesn't break the bank and backed by Warn Warranty 3. Synthetic 4. Haven't gotten to use it yet but will soon Just got this installed in a custom stock bumper winch mount. Hoping to maybe get to use it on a fall color run this weekend, but will definietly use it the...