Search results

Stock steering knuckles with less than 33k miles and in perfect condition. $150 for the pair shipped on your dime. I understand that they are the same on D30 or D44. PM me if you are interested or reply for more info.

I decided to go ahead and post a diagram of how I wired my locker switches. The internal switch diagram shows which terminals are connected to which light on the switches that I purchased online. Do a web search on 4x4 locker switches. I connected so that the bottom light illuminates "Front...

A few trail shots Here are just a few of our trailride shots.

continued When the load on the roof rack compressed the rear springs more than I liked I used the write up on this forum to install air-bags. Problem solved. Smittybuilt seat covers with multiple pouches were added to provide storage for various items that wouldn't fit in the glove compartment...

continued The next mod was to add a roof top rack for hauling camping gear for taking our youngest grandkids jeep camping. I ordered the inexpensive rack online and used the supplied hardware that was intended for use with SUV roof rails and reversed it to fasten to the roof using Rubber...

I've really gotten a lot of great information from this forum and have even posted some info about some of my mods. However I've not done a build thread, so here goes. We bought our 2010 JKUS in March of 2010 with the auto trans and 3.73 gears. I'm retired and 72 years old. We have other...

Have you bent yours? If so did you upgrade or what? I see you are from Reno. The axles I got came from Reno and were modified at High Rollin Customs in Sparks. Do you know of that shop?

Thanks for the great replies regarding my set up. Regarding my question "what have people been doing when they bend their axle?" I was also wondering if people are bending their axles jumping their JKs or can they get bent or broken just rock crawling?

Stock D30 axle shafts SOLD I have a pair of Dana 30 axle shafts in great condition. They have less than 33,000 miles on them. $150 for both sides and you pay the shipping. PM me if you are interested or reply for more info. SOLD!!!

I have a 2010 JKU Sport and recently swapped in 2014 Rubi axles (w/5.13 gears, C gussets, RCV & G2 shafts and RuffStuff covers) that I purchased from another forum member. I've now upgraded to 315x75x16 tires that actually measure 34" from the 285x75x16s I was running. On this forum there is a...

I've never broken mine on my 2010 JKU and I tried the brass bushing recommended on another JK forum and it didn't fit. I purchased spares just in case and cut a hole in the console (while I had it out) so if the part does fail I can get to it without having to remove the console. Anyone...

Chopped both ends to match I agree that our JKs look great without a rear bumper. With the EVO D ring mount ends they look even better. However, with my 315x75x16 tires I wanted to chop the rear bumper instead to better support my full size spare. I didn't want to have to spend $800 on a new...

Is there any chance that someone would be interested in a used D44 rear axle housing with 3.73 gears and limited slip. I swapped in rubi axles on my 2010 JKU sport and will sell my old rear housing for $150 plus shipping on your dime. I've sold the shafts and am keeping the brakes for spare...

I swapped rubi axles with 5.13 gears into my 2010 JKU and want to know if the unit bearings I pulled out of my D30 will be OK to reuse. I had to use a puller to get them out of the D30 as they wouldn't budge without one. They didn't come apart when I pulled them and I want to know if they are...

I've checked the write-ups and don't see one on changing the 4 speed automatic transmission fluid. Am I missing something or is this something better left to the dealer? My 2010 has just turned over 33K miles and I would like to do the fluid change myself unless it's not advised.

Alternative tire bump stop solution I read this thread after installing 35" tires on my JK and was thinking about getting the Daystar tire isolator. With the problems noted I came up with what I think is a better solution. I got two 1 5/8 x 1 5/16 x 1" #5 rubber stopper from Lowes for $1.99 ea...

I just installed 35" tires on my 2010 JKU Sport and came up with the following solution to the "extended bump stop" issue with the stock tire carrier. I got two Hillman 1 5/8x1 5/16x1" #5 rubber stoppers from Lowes. They fit perfectly in the holes in the stock bump stop and push in to be just...

I have a 2010 JKU sport automatic that I've just installed rubi axles in with 5.13 gears. I've increased the tire size to 315x75x16 and chopped the fenders with a leveling lift. I used the superchips tuner to set everything correctly for this combination. I'm also running the 87 octane tune...

2010 Sport Alloy wheels SOLD I have 5 17" Alloy wheels off my 2010 JKU at $200 local pick up or ship on your dime. I'll break up the set for one wheel at $50 or four at $160. No TPMS sensors, but wheels have seen very little use. PM me if you are interested in making a deal or reply if you want...

Attached are photos. I also have the rear brake backing plates with park brake shoes for sale for $75.