Search results

I took your advise and installed the midland mtx575 under the steering wheel and added the Cat5 mic extension. I used a 1 1/4 holes saw and cut a hole inside the firewall right above the steering shaft for the Cables. added rubber grommet and black RTV to seal all. super happy thanks

Thanks for the quick response, I'll see what happens when I get it hooked up, I do have a SWR meter for the final tweak. (y)Ken

Just got my MXT575 like 1 min ago GP NOIR is there any instructions or Video on the Web for the install ?

I usually go to 15-16 psi on the BFG's but wasn't to sure about the bigger tire, THKs

Just got back from ORW I ordered 5 Toyo MT 37s when will they come in? who knows but got my ticket stamped :) I was wondering what PSI I should run on the Rubicon Trail in July, just have Method Wheels,

Im ready for 37 tires currently I am running 315x12.5x17 BFG Ko2 (quiet) I changed when I first got my Jeep 2017, Now I am at 30K. I have upgraded My Rub with Carbon Axles, Big Breaks, Evo Truss Kit, Barns Drive Shafts, Terra flex BJ, 1 ton Barns Alum DL and TR, HD Track Bar, 3.5 Lift, Fox ATF...

Welcome, Im new also. I have found a lot of great posts full of informative info. Happy trails

Our first trip to Moab with 3 brand new 2017 JKU"s we hired Dan Mick for the first day to guide us around. We split the cost between 3 of us so it was not expensive. Dan picked us up at our camp at 6am and we followed him and wheeled till 8pm. He had radios for us and took us everywhere, Hells...

Maybe these guys who upgraded to a bottle jack could help you out :)

Sometime you forget where the Sizer Jack is hiding. I think jacking up the jeep is pretty easy with the stock jack I just bring a block for the 37's

Looks like you have a good plan, welding your alum is a good idea, sometimes I add a run off/on tab of alum before and after the weld that can be removed to keep the edges from burning off. Lets se some pictures

Try changing your Oil, sound like the viscosity has gone.

DaBank, I went with Barns Alum 1 ton Tie Rod and Drag Link ($500), I reamed out the Steering Knuckle at the wheel with a Tapered Reamer and Relocated my Drag Link higher on the axle to accommodate the Lift. Replaced the Ball Joints (Teraflex) and So VERY happy with how well the Jeeps handles. My...

Welcome, Happy trails

Welcome from SoCal there is a Jeep thing tomorrow in Huntington Beach right close to LA. I might go not sure yet but welcome. I new also. http://www.jeep-bash.com/

I would take it back because the report clearly shows the Caster acceptable range is (3.20-5.20) and you brought there to make it right. Not 3.09 deg. factory setting is +4.2° thats in the middle of the acceptable range and thats pretty easy to hit. also you Toe on the right side needs bit...

Looks great nice job

I replaced my BJ at 28k and I used Teraflex. First time and It was pretty easy just watch their video. I bought a BJ press from Harbor Freight and used a large socket not the fancy tampered tool, just line up the fittings and make sure they seat flush it just a c-clamp press nothing fancy . My...

Welcome Im new also, I retired Manufacture engineer with lots of time on my hands, been making all sorts of Jeep stuff in my Shop. I hope you keep busy. last Welding project attached. Ken