Search results

The rear sway bar links should be on the outside correct? Toward the wheel.

Yes I have 12.5 wide now and there is a few inches but it seem with the 13.5 it is going to come very close.

Ok so I aligned my jeep now looking at the rear end it looks like my 37x13.5 toyo mt would rub on the rear sweat bar links. Am I wrong or do I need wheel adapters? My rims have 4.5 backspace

I have the synergy drag link and the double sleeve side is fully extended so I have to remove it from the pitman arm and let it out from there and bring in the other side some. Shouldn't take long.

I'm doing the alignment first thing in the morning not waiting for the tires. Just want the tires balanced properly when I do put them on and not many shops are good when it comes to oversized tires.

It is off center big time. I'll have to try and fix it in the morning I was exhausted after everything. Mavis is the only place opened on a Sunday was wondering if I should take it to them to mount and balance my tires or wait till Monday and go to my normal shop who specializes in oversized...

I just finished installing my Currie 4inch lift, synergy high steer, King 2.5 shocks but now when I drove it around the traction control light is on. I'm assuming it's because the alignment is pretty bad. I have to wait until Monday to put my 37's and have it aligned

I just finished installing my Currie lift in the rear but the sway bars came disassembled and didn't come with any info regarding its length. So I just added 4 inches from the stock and put it together I ended up setting it to 13". Also Currie didn't send my the rear brake lines so I left the...

I'm installing my Currie lift tomorrow and have a question. I've read up eddies topic on how to align the front end. But with the rear what should the measurements be with pinion angle?

I'm waiting on my lift to get delivered and need to weld the track bar brackets. What's a good cheap arc welding machine I can buy to practice and use it on my jeep while I wait

For a while now I been having a thump sound coming from underneath the center of my jeep when I drive at decent speed on rough road. Happens often on the highway and hardly when wheeling. First I thought I was a bad transmission or transfer case mount but disregarded it as it was for a split...

I just ordered my lift and should get in a few weeks. One question I have is I'm pairing it with King 2.5 shocks and the kit comes with relocation bracket for the front and rear. I personally don't like the way they decide to mount the lower rear shocks out in the open and to flip the fronts. If...

Just a random question Wondering for those who did enough damage on the trails and wanted to go through insurance what did you tell them that happened?

Got my fresh set of 37x13.5 toyo mt next to order is my lift. Finally my build is gaining ground.

love to abuse my jeep and with my 4 inch and 37's going on in a few weeks it would be a great addition.

When the dealer changed out my power steering pump a few days ago the service report showed a few software flashes. I was concerned that it erased my tune I had set. When I plugged in the tuner and try to retune it I get a message that vehicle id is not the original. The vin is the same that...

So today I installed my cobra 29lx with a 4 ft Wilson antenna and when I went to test it out I get a antenna warning up on the screen. I'm not sure if this topic was covered but any idea what it could be?

My 14 jku with 22k miles started to act up the past few days. When my tires are not in motion the steering is extremely stiff and a odd noise almost like a whining gear. Takes a lot just to turn the tires. I have 33's bfg km2. Going to a 4inch lift and 37's toyo mt next month I wanted to know...

So today I was able to drive a buddies jeep it had a 4 inch bds suspension and it drove fantastic. It was very smooth on the road and it absorbed the hits pretty nicely. Plus note it was a Manuel and I hate myself for not getting my jeep with a manual transmission. I fell in love with it. As my...

For the past 6 months my evap would make an odd rattle only when I would first start my wrangler then stop. But now that it is getting cold out the rattle is happening more often at random times. I have taken the stock skid plate off but nothing seems to be wrong. I do have an dynomax...