Search results

^ that video is awesome, but this one is better :) Sent from my SM-N900V using WAYALIFE mobile app

Gonna be a few weeks because I will be wheeling instead of working on the jeep on the weekends :) next 3 weekends are full with runs, hopefully with the kids schedules of sports activities I get to make 2 of the 3 :) And here's the metal I need for front shock relocation brackets- $15 I will...

Did a little cutting tonight... Got all the pieces cut I need... now time for some welding... might be a week or two :( Sent from my SM-N900V using WAYALIFE mobile app

Here's a pic of a hi lift on the rear roll cage on my tj- mounted with muffler clamps Drill two holes in the hi lift base that line up with the muffler clamp and then the other side had a bolt going through a small piece of metal and a hole in the hi lift, attached to a muffler clamp Sorry don't...

As a system admin, I received a Helpdesk ticket today, a coworker accidentally renamed a file folder.... Sent from my SM-N900V using WAYALIFE mobile app

Maxxima M85416R led taillight with reverse. New design is actually a flat mount (older model required a 4" hole) you just need a 1" hole in the middle for the wires to go through. If you didn't get the pigtail wire ends, just cut the pl-3 ends off the wires. There are 2 pigtails- the top is...

Np, I love my lil black nuts! :D Sent from my SM-N900V using WAYALIFE mobile app

Thanks Jerry and Steve- I just figured it would be good info to have in one thread :thumb: as mentioned above, if anyone has any info to add, please do!

JK wiring continued JK- adding led 3rd brake light/ license plate to spare tire location Use the 2 wires from existing 3rd brake light plus you will need to run 1 wire either thru the tailgate or under right rear to the right rear taillight Factory white/yellow tracer is brake light positive-...

JK wiring JK- Adding led side markers- Black led wire goes to white factory wire White led wire goes to black factory wire. See one wire mod to add flashing of side marker http://wayalife.com/showthread.php?15486-Blinker-Mod-for-2013 When doing this mod- the led black wire would go to the...

I figured I would start this thread as a source of info for anyone adding led lights to replace factory bulbs to their JK or TJ. I am going to add to the thread over the next few weeks, but if anyone has any info or corrections, please post up! First a note on side markers- despite what you...

Lol, framily- why is the dad a hamster? :) Glad I could help! Sent from my SM-N900V using WAYALIFE mobile app

Moo :D Sent from my SM-N900V using WAYALIFE mobile app

I had done all my wiring from underneath the jeep, I knew there was a factory wireloom that ran along the top of the frame rail where I was running my air hose and rock lights, but I had never seen it from the topside until yesterday when I pulled the inner fender out. The factory wireloom has...

Well, full moon tonight... New challenge- your jeep and a road sign that says "bump" Sent from my SM-N900V using WAYALIFE mobile app

Figured I would post this so maybe it will help someone else- if you run any wiring or air hose down the passenger frame rail at the engine area- keep it tight to the rail and cover it with heat tape. After driving for ten hours straight to CO a few weeks ago I noticed my high temp air hose...

Awesome pictures! Glad Ken is doing better :thumb:

Where can I get one of those? :) Sent from my SM-N900V using WAYALIFE mobile app

Don't shave too much! :)

:d