Search results

Fresh coat of paint on the rock sliders.

Just the wheel thankfully, the caliper didn't rub it very much. That was the drivers side the pads look like this: The passenger side looked like this: Got a ride to the hardware store and found another caliper bolt and got some pads from Napa. Put everything back together and the...

run them around the other side of the shock.

Houston we have a problem

I have a squeal coming from one of the wheels. Not sure if it's a bearing or a warped rotor, but once I apply the brakes it goes away, it also not continuous, it seems like it is half rotation of the wheel... On another note: 66k miles and my brakes still look good, not sure if that is a good or...

I have also "finished" installing the trail cage. I need a little more work on my plastics and need to get it powder coated. I also need to mock up the c-pillar kit and decide if I should just paint it black and pad it or get the bottom bracket and the pillar welded and powder coated and leave a...

Thanks, Steel is coming along nicely as well! Congrats on the level and the 1/4lb and the new wheels. I'm sure a good deal on tires will pop up. Thanks, I just went out to get these: I have the fan in a push configuration as putting the fan behind the rad didn't fit. I used the PSC radiator...

Back in the spot where it all started!

I had just finished installing the Evo 3" enforcer in the picture in the post that you quoted. None the less bumping the commando green green thread with a little useful info. I looked into getting my poison spyder trail cage painted and got 4 different body shops to give me an estimate, they...

Today my battery finally took a shit, I had felt it coming for a while and ordered the Odyssey 34R-PC1500T yesterday. Well my battery wasn't going to make by the expected delivery date of 7/25, so I had to fork out some more money for a cheapy at o'realys. I received a big ass box that...

Update: I added Teflon to the fittings of the aluminum cooler that I had and I also tried to add a bleeder plug on top of the cooler because it was trapping air and the steering was not right. Well I ended up messing it up and the bleeder plug just became a giant leak! So to get going I took out...

lol

Lifted Jeep Liberty, it is a pretty cool looking jeep

Those are the most loyal dogs and they are so smart like you said. I had one for 9 years. He was the best!

Man, honestly I was kind of routing for you, I said to myself "this guy is cocky as fuck thinking he can do better himself than a the evo sliders-I know I couldn't, but kudos to him if he can pull it off" now I will still give you kudos because you can weld, sorta, but.... A for Affert I guess?

I don't know what % I ended up with on the front but when I have the rear of the Trektop on, the front doors match the rears pretty well in my opinion. I only had the fronts done as the rears were tinted from the factory. But as you can see in this picture without the trektop, the fronts are...

I got it all "finished" up! Took some pictures today The only issue I may have is that I think the PSC system is running pretty hot, even with the cooler. Is that normal for these kits? Today the ambient temperature while driving was 75, however the temp display in the jeep was...

I got my PSC hydro assist installed last weekend! I turned out pretty good I think. Had to extend the tracbar bracket a bit so that I could mount the ram I also installed a cooler for the power steering fluid I was able to install the res without having to cut into the air box. It is...

So finally got my sliders welded last Wednesday!! I like them

Finally taking some time to install my PSC steering kit with a cooler!! I have all the new stuff mounted and am now working on the plumbing not bad seeing as I started today! Some pictures! I had one hell of a time getting the pitman arm off but it finally budged with a little heat Got...