Search results

That's cool!!!!

My Bro in law's new ride....

I decided to smooth up two sections on my knuckles. One across from the other and try to slide the yokes through. I took off about 2mm on each side. Wiggled a little and got it through. All back together Enjoy dad....

Pictures for reference to start with.

So my dad ordered some new Chromoly shafts for his 08Rubi JKUR from NR. I've got all of them in but the passenger front and it won't fit through the hole in the knuckle. The yokes are too wide. They are 10 factory. Any thoughts? Grind them down a few mm's? I have to fineness it into the...

How many light bars can a person put on their rigs?

This looks pretty cool. I saw it on a post on FB. It looks to be out of Russia, but based on a JK. Thoughts?

Here is the one I used. It looks like it's the same as vjusmc's

ENTER to WIN a Dynatrac ProGRIP Jeep JK Wrangler Brake System Thank you Dynatrac and Wayalife for the chance to win this set up! With the installation of 37" tires, I need his kit. Plus, I can officially represent by running a Dynatrac sticker ( or two). Keeping my fingers crossed.

Here are mine. I am digging the color matched!

I like a plastic wheel on a dremel tool. Then scrape both sides of the cut with the edge of a file. It makes the cuts really smooth. I know your looking for liners but that's how I did my fenders and you can see the edge I'm talking about.

Have you tried a silicone lube instead of WD40 for prevention of rush? I'm thinking about trying some...

EVO co's, slabs and 37" NITTOs

The second "tip" I remembered from last time was to mark my brake bolts so I got them aligned right. When you add on new brake lines, you want to make sure you replace the two copper washers ( one on each side of the brake line "block"). You also need to make sure you tighten the bolt so that...

Then drill from the underside with the correct size drill bit of the hole I needed drilled. The tip matched the pilot hole and all I need to do is focus on getting the tip in the hole..... And the two holes drilled where they need to go!

I then got a right angle drill from Lowes and a drill bit with a hex connection that would fit in the right angle adapter. The diameter of the drill bit matches the tip of my drill but to make the hole that needs drilled(again, not being able to see the holes to drill from the bottom up and no...

While I was installing the kits this time, I wanted to put up a couple "tips" that I wish someone would have done for me. I'm an OK mechanic but still have so much to learn. I love to wrench on my own rig( I tell my wife it's actually my therapy). Again, I'm sure others have better tips but...

It's got some settling to do and then some fine tuning. Then to finish the other do dads.

Aaaaaaahhhhhhhhh. Oh how I've missed CO's and 37" Nitto's!!!!

Here you go Scott. I wish they were all mine. Just the middle Elk. The big bull on the Right is my Dads. The rest are my brothers. They just needed a place to hang em. That was over two years ago.....