Search results

Here are some from Tucson AZ

Hi all, I am selling one of my Jeeps, a 2014 Rubicon with very low mileage. I am asking 28,000 dollars. Here are the following specs and pictures" 2014 Jeep Wrangler Rubicon VIN: 1C4BJWCG2EL246068 Exterior: Anvil 3.6L V6 CYL 24V High Output 6-Speed Manual NSG370 Transmission 4.11 GearsLeather...

So, the other day I was driving down the road and it started to rain here in Tucson and my Jeep started to act up electrically. The engine started to run super rough, I was getting the general misfire code P0300. I had dash lights going on and off. I did not know if I was going to make it home...

Ok, this is the first prototype. I used chip board because a) I had some here at the house and b) it is cheap. There is a second piece under the soft top. So it is two pieces. I used cheap Orielly's auto carpet to cover it for now. The final product will be made from birch plywood, because it is...

Ok, I have a leak in the front of my JK by the radiator. It is not the radiator because I just changed the radiator with a new oem mopar one. My radiator was leaking initially, So, this leak seems to be an oil substance, my oil, transmission and power steering fluid levels are right where they...

Ok, question? for all of you who put a Dynatrac Pro-rock 60 in the rear, what did you do for an exhaust system? Mine is getting smashed by my Track Bar. I went to an exhaust shop here in Tuscon and they said they cut basically do the exhaust dump before the axle and the resonator would be tucked...

Well, I am finally back in 4wd, I finally installed my Dynatrac Prorock 60 (Thank you again Ed). Both new 1350 driveshafts are in, I also put in a new radiator (mine started leaking). Now I just need to by a ARB Twin Air Compressor to hook up my Air Lockers. Then I will have a custom exhaust...

Ok, so I have a vibration issue -- it is like going over a wash board road or rumble strips. The Vibration was originally at only about 45 MPH and now it is at 45, 55 and 60 MPH. It is not Death Wobble, My steering wheel does not shake and the Jeep drives straight as an arrow at all speeds. I...

Well, picked this up today, restoration begins.

Our Family’s Military wall. I am just missing my Uncle Buddy’s Picture, my daughter in law and my Great Uncle Paul Picture.

First I want to give a shout out to Dan and Lisa from EVO, they were awesome and outstanding customer service. Top Notch. Well, I got my EVO Bumper and Stinger Bar installed, after a lot of choice words and a few tools hitting the ground, and help from my son, I got it installed.

So, I received my JK CB Bar last night and installed it. This thing is freaking awesome. I had my Cobra 29 LX BT mounted to the Rugged Ridge footman loop bracket, and it was horrible. The CB would bounce on the trails and constantly hit my rear view mirror. The CB Bar is solid and the CB does...

I had the same problem with my 1996 ZJ, it was the idle position sensor, 5 minute swap and I had no more problems. I actully swappy the idle position sensor and I think it was the throttle body sensor.. I bought my ZJ brand new and had her for 14 years, I put around 327k miles on her. the only...

I have a 2010 JKU Islander (Basically a Sport with Badges) 3.8 liter automatic. I am going to swap my existing transfer case with a Rubicon Transfer case. Is there any requirements for flashing the computer or reprogramming due to the swap?/

Well, finally got around to installing my pro rock 44 and 37s. Now I just have to get my rear pro rock 60 installed. Shout out to Ed, thank you Ed. I also finally got my shop arranged how I want, for now.

Ok, please be honest. What do you all think about this JK Hood. I was going to buy a hood louver for my Jeep. My Jk runs a little on the hot side when temps hit 95 and above. Now, that I live in Arizona I wanted to add some sort of vented hood, I already have vented inner fender liners. I found...

Ok, I have a pro rock 44 front and pro rock 60 rear with 4.88 gears. I currently have 3.73 gears. I was wondering if I could install my front axle and not hook up the drive shaft and still drive it. It is my daily driver. Then I could measure the length for my adams drive shaft. And then next...

So, we moved to Tucson, Arizona from Helena, Montana to get away form the snow and this is what I woke up to this morning. I guess it is ok, it is suppose to be 80 degrees next week. Could be worse could be -20 Degrees.

Ok, so here is the scenario. I originally got a check engine light about a month ago, i turned the key three times and it spit out the P0420 code. So, I knew I had a cracked driver side exhaust manifold for a few weeks. I waited about three weeks to change it. It was in the negative teens in...

I was wondering if someone could help me out. I have been driving cross country and traveling for work and I finally made it to Tucson from Montana. When I hit Flagstaff AZ my driveshaft started to chirp real bad. So, while. I was in the hotel, I pulled the front drive shaft and greased the...