Search results

  1. jkjurny

    TeraFlex Rear Speed Bump space between bump stops

    Kit was installed back in January. Found this picture which is the best one I got from after the install. Looks like I had about 2" of space. I do have the back loaded up with 50lbs of gear. I'll try unloading it tomorrow and see how it looks...
  2. jkjurny

    TeraFlex Rear Speed Bump space between bump stops

    I have a 3" lift and while inspecting the suspension, I noticed this for the first time. There is no space at all between the bumpstop and rear speed bump. Is this supposed to be that way?
  3. jkjurny

    Read Diff Cover

    Thanks. I zip tied to up to a hose that looks stationary when articulating. Came out great! Front one was hard to get off. Used some really strong gasket. I used The Right Stuff for both. Rear was cake.
  4. jkjurny

    Read Diff Cover

    here's the picture.
  5. jkjurny

    Read Diff Cover

    I have a'12 JKRU and am changing out my diff covers where I noticed this on the rear. What's it for? I'm going with the Poison Spyder diff cover and not sure of this will bolt back in place. If it doesn't, I can just zip tie it to one of the other tubes hanging out, right? Thanks.
  6. jkjurny

    U-Joint Trail Fix

    For your trail vice, did you build your own? I noticed that Harbor Freight has a hitch vise mounting plate. Also saw a cool one from Mac, but its pricey. I guess the extra cost is for the bottle opener :-)
  7. jkjurny

    U-Joint Trail Fix

    Been doing some research on this. Just want to confirm that you guys bring a U-Joint press as a part of your tool kit? What else is recommended to bring for doing a u-joint trail fix?
  8. jkjurny

    Poison Spyder Diff Cover and Teraflex Rear Trackbar Relocation Bracket

    Does anyone run this combo? Will the TF bracket move the rear trackbar enough to not hit the diff cover? If it does hit, how about the Dynatrac?
  9. jkjurny

    Hill Descent Control

    Have you guys used this? Do you use it regularly? Has it failed on you? I've tried it twice in 2nd gear (2.5 MPH according to the manual), and I liked how it felt. I'm assuming it'll go faster in order to prevent wheel lockup or skidding. Just want to know of anyone has any negatives about...
  10. jkjurny

    Tera Flex Speed Bumps

    Here are the best I have in my phone. Looks like mine have more space then yours in the front.
  11. jkjurny

    Where did your Jeep take You this Week?

    Mammoth Lakes and a drive through Yosemite. No offroad pics though.
  12. jkjurny

    Options for Airing Back Up??

    Powertank! You can also use it to run air tools. I also carry a $75 Slime compressor for backup to the Powertank.
  13. jkjurny

    Storage ideas

    Ratchet straps, tire repair kit, winch controller, small ratchet wrench set, 2 foot breaker bar.
  14. jkjurny

    PSC Brawler Lite Skid Plate or Not

    Here's a picture of it. My bumper is the mid-width though.
  15. jkjurny

    Mammoth Lakes Trails?

    We're camping in Mammoth in two weeks. Was wondering what trails people recommend that are less than an hour from the city. I already saw Laurel Lakes and Deadman's pass. Any others and advice? Thanks!!!
  16. jkjurny

    Best place to mount a camera?

    On my 4-door in the middle of the front and rear door. Look for it in this picture.
  17. jkjurny

    post your Teraflex 3" flex arm suspension!!!

    Here is mine. It's basically the prerunner kit minus the limiting straps.
  18. jkjurny

    Poison Spyder Bumpers and Armor

    They are awesome. Love the way they look. Powder coating them wasn't such a chore. You also get to choose the type. I got a crinkle black in mine.
  19. jkjurny

    WIN a DynoMax Exhaust System!!

    Posting to win!
  20. jkjurny

    The Winch Thread

    Yup. Got it crinkle black powder coat.
Top Bottom