Search results

After we checked into moab we decided the first order of business should be to sleep and get up early to hike the delicate arch bright and early. We soent some of the day relaxing due to the heat and then trekked out to potash rd and see the dino foot prints and the petroglyphs. Gotta...

Good morning ladies and gents, having been recently on a trip across the states recently i thought i'd share in my adventures and experiences. Our trek took us from Ontario, canada through 12 states, 6 US national parks and 3 offroad trails and we went swimming in two of the great lakes. We...

Took on black bear pass yesterday. Still a tonne of snow up there and my first time on colorado trails. Was great, the steps were a bit scary for me but i made it. And now were in moab for a few days!

Thats a nice photo. Heres a couple ive taken. The star trails were taken with a gopro hero5 black and the milky way was with a D750. Unfortunately theres a lot of noise in the milky was as it was taken at f4 and the iso was way up at like 2800. Since picked up a f2.4 14mm lens and thats gotten...

Eddie has a good write up on this but you can go to lowes or a hardware store pick up a 1/2" threaded rod coupling and grind down one side to fit the 17mm hex key and leave the other side and use a 3/4" wrench on it. Works like a charm and ive used it twice now. I do believe you also have to...

I have the same setup your looking at, on mine. Been on there a couple years now. With a 2.5" you may or may not run into rubbing on the fender. I didnt with my RE 2.5" lift. Ive been overally happy with it. However with no weight in the rear it can be slightly stiff at times. Heres some pics...

hey everyone, my girlfriend and I are toying with the idea of using our vacation time to head down to Utah, Colorado, and Arizona. but I do have a few questions for some who might be in the know and have more experience in those areas than I. Being that we're in Ontario it'll be quite the...

Mine leaked from the top of the drivers side. I replaced it with the spectra about 6 months ago. From my understanding and what ive read, thats the typical place that most jk rads leak. Sent from my SM-G960W using WAYALIFE mobile app

I use factory rims and 1.5" spacers which gives me an approximate 4.75" of back spacing(6.25 -1.5) and with my 35x12.50s i have no rubbing whatsoever on a 2.5" lift. I have heard people having rubbing while stuffing the tire with OEM fenders but fortunately i havent run into that issue. I...

Your situation/jeep setup is basically identical to mine. I have a a 6spd and 3.73s. But i did forget to mention in my first post, when i originally installed my lift i thought it looked nose high so i ended up installing the 1" teraflex spacers in the rear. But id let them install the kit...

I have the RE7121M that you should have gotten in the first place. With every part that came with that kit i was able to stuff my 35" ridge grapplers under factory flares. I did still tear the front shaft boot as it did rip at the Rzeppa joint on the Tcase. Has since been replaced with a...

Like others have said on the saharas it has a position for automatic 4wheel drive. Sent from my SM-G930W8 using WAYALIFE mobile app

Heres mine. Working on a boiler room. Sent from my SM-G930W8 using WAYALIFE mobile app

This is info about tjat wagoneer from one of the designers on instagram. A bit more info for you Sent from my SM-G930W8 using WAYALIFE mobile app

I dont know how the leaf springs in the 3500 are but the 2500 rides very nice for a heavy duty diesel. Im sure youll enjoy it. My brothers went into the dealer a few months ago for his tranny on his 2500 cummins because the clutches were slipping in sixth gear(if i recall thats why) and they...

So thanks for the tips and ideas i thought long about how i was gonna tackle this project. I ended deciding the original plan was the best solution to the 2dr soft top dilemma.... i think i looked up every possible item/manufactuer so heres my project taking form. This is all put together and...

If your running the same kit i am, as in RE7121 with the mono tubes you should clear 35s without any extra lift. I run 35" ridge grapplers and they stuff under my stock flares just fine. Seeing as you have flat flares already my suggestion would be to pick your tire size first, get it, and...

I've seen one thread regarding a DIY storage deck on here and was wondering if anyone else has thrown together something for the back of their 2dr JK. I'm thinking of making something out of some plywood and 2x2 pine or balsa/basswood(to save weight). most likely if i do ill use 1/2" plywood on...

One thing to consider is whats called the "working load limit" or WLL which is what the piece of equipment is designed to be used at under normal use, also sometimes called "rated capacity" or "safe working load" SWL. Most times good rigging/recovery gear will have that labelled on there...