Search results

Does anyone know of a cargo rack that would be compatible with the Genright swing out carrier and 37" spare? I have only seen 1 that looks like it might work, but it's a smittybilt and also only rated for 35lbs of cargo [emoji849]. I would prefer to not go roof mounted if possible. Thanks for...

Haven't been able to get out in the snow recently, but found this pic from this time last year. I need to make time to get out more often. Sent from my iPhone using WAYALIFE mobile app

Exactly, always clean tight wraps under load. Sent from my iPhone using WAYALIFE mobile app

Definitely a good idea to use this method on synthetic. With steel cable you want it as neat as possible so that the cable can't crush itself. Sent from my iPhone using WAYALIFE mobile app

^^ this. You have the most pulling power on the first layer of cable. As the layers increase your ratio decreases and power decreases. I don't recommend using the winch and reverse at the same time. Lots of stuff can break, the shock load can snap a cable, and your drivetrain is also taking a...

The rule of thumb for cranes (I do not have the actual regulation handy) is 5 wraps. The reason being that your cable anchor point to the drum only holds the cable in place to begins wrapping. Your actual pulling power comes from friction of the cable wraps around the drum. You will not have...

Honestly for the OP it sounds like beadlocks would be a huge waste of money. Not playing on the rocks I can't see a need to be aired down into the single digits. Sent from my iPhone using WAYALIFE mobile app

The best pic I have showing the low angle. This was right after install. Sent from my iPhone using WAYALIFE mobile app

Sent from my iPhone using WAYALIFE mobile app

So it feels tight turning? Your profile looks like your running 37s and no ram assist yet. If that's the case I would think what you are feeling is normal. That is a lot of tire on a weak power steering system. Sent from my iPhone using WAYALIFE mobile app

Sent from my iPhone using WAYALIFE mobile app

Sent from my iPhone using WAYALIFE mobile app

Just found this online. Looks like Dana 30/35/44 all should be 1/4" wall so you should be good to weld away without fear of blowing out. Sent from my iPhone using WAYALIFE mobile app

What axles do you have? I know your in a YJ and some guys might answer based on their knowledge of JKs. Sent from my iPhone using WAYALIFE mobile app

Great point. Never use bearings to carry electrical load of any kind. Always best practice to ground as close to your work as possible. Sent from my iPhone using WAYALIFE mobile app

Bearings and seal in rear axle ride on the very last couple inches of the tube And the carrier in the diff. So stay away from there and you shouldn't have a problem. Front axle doesn't have outer bearings in the tube so you are fine there. Sent from my iPhone using WAYALIFE mobile app

I'm trying to get some ideas for a summer vacation spot somewhere within 1 state away from Nevada. We did the Oregon coast last year. My wife wants something kid friendly with good scenery and maybe somewhere that we can rent a fairly private cabin or house etc. I myself would like somewhere...

Evo Rockstar skids for the rear. Looking forward to moving those low hanging shock mounts up a bit. Sent from my iPhone using WAYALIFE mobile app

Glad you got it figured out. [emoji106] Sent from my iPhone using WAYALIFE mobile app

Their install instructions do list part #s. Maybe you can get it all separately. Sent from my iPhone using WAYALIFE mobile app