Search results

I've owned my JKUR for 7 years now and dealt with an off and on (sometimes loud) creaking sound from my clutch engagement mechanism. It is a manual and the creaking only occurs when I'm pushing down and releasing the clutch pedal. The sound is not coming from the pedal itself, but from the...

Here are a few more pictures of my LED rock lights and how they are mounted: '07 JKUR

Yes the LEDs are the round ones with the threaded mounting base. They look like bolts but with an LED for the head. Here are a few pictures: View of a light mounted inside of my rock rails. I used several times of fabricated mounts, each to suit the mounting location I wanted to use for...

Your's is looking nice too! I like the color match internal plates on your Poison Spider rock rails! Here are the pictures of my rock lights on: You are seeing two colors of light because my first set of the Eagle Eye LEDs were around 7000K (blue) and the new set are closer to 4000K...

It's loud but not nearly as bad as no muffler. Here is a picture from the driver's side. Here are a few other pictures: I'll try to get a few pictures tonight of the rock lights. '07 JKUR ... mod'ing never stops...

It's been a while since I updated this thread. Over the past two years I've done several upgrades. Here are the ones I can remember off the top of my head: - replaced RK track bar brackets with the EVO brackets and re-installed the OEM track bars - various electrical upgrades (USB outlet...

Now is the restoration complete? The skid looks great! '07 JKUR ... mod'ing never stops...

Awesome way to summarize 10 years of your videos! I have no chance at winning the shot glasses but I enjoyed watching the video[emoji106] '07 JKUR ... mod'ing never stops...

My daughter named her Stella. Makes sense since you can easy see the stars when you look up and the top is off! '07 JKUR ... mod'ing never stops...

Here are a few pictures of my wiring harness to my sway bar disconnect motor: You can see the passenger side of the sway bar motor in this picture. This picture shows the harness' plug into the sway bar disconnect motor. I hope these pictures help, Matt '07 JKUR ... mod'ing never stops...

Great job! When I replaced my plugs the originals had all had about a .65 gap. I think the growth in gap was due to wear on the electrodes and the expansion of the metal over years of heat cycles (engine running and then off and cold). That's why I will ensure to routinely replace my plugs...

I just looked under my '07 JKUR. My wire harness for the front locker runs on the drivers side while the wiring harness for the sway bar is run on the passengers side. Here are a few pictures of how the front locker wiring harness is run on my Jeep. Picture of the wiring into the front locker...

The only thing that would make this picture look better is a set of Zebra Half Doors installed on my Rescue Green JKUR! '07 JKUR ... mod'ing never stops...

I've had the Pioneer AVIC-5200NEX head unit in my '07 JK for about a week now. So far I am very happy with it. The install wasn't exactly difficult but it was very time consuming mainly because I like a clean install. A good part of that time was installing and routing the power & video...

I've been running the 35s for a few years. I bought them right when they came out. I think they wheel great in the mud, dirt, snow/slush and decent on rocks. They have a nice beefy sidewall with two different patterns on the sidewalls. The road noise isn't too bad. They are much quieter...

It's been several years since the defroster tab broke off on my passenger side and I fixed it by re-soldering it back on. 4 years later it's still working properly. So I noticed a few weeks ago that my rear window defroster no longer worked. So this is what I found: The tab has broken off...

SOLD: I have a complete axle set of new Synergy "HD" ball joints for a JK. They have never been taken out of the boxes except for me to take the pictures below: I have decided to go with Dynatrac's BJs so I am looking pass these onto a forum member at a discounted price. I'm looking for...

I just received it! Thank you again so much for the great deal and careful packing. Perfect condition! '07 JKUR ... mod'ing never stops...

Stella (my daughter named her...) '07 JKUR ... mod'ing never stops...

Great way to create your wave thread! Welcome to the forum from Alabama. '07 JKUR ... mod'ing never stops...