Ok....specs: 2015 jk with 2.5" JKU RE springs (netted 4.10" ) lift over stock.
Hydro shocks 24" extended
Proper sway bar links for lift (sway bar level)
Front and rear axle side TB relocation brackets...
Funny story,
Yesterday a jeep buddy and I tackled a front trackbar install......so today I take it down the road and I am hearing this "clunk clunk clunk" as im going down the road.
So I drive back home VERY slowly and cautiously. Get under the jeep.....re-check all the torque settings etc...
I couldnt find it and was wondering if anyone has/or know where the stock height measurements of a rubicon/willy's package JK would be.
I installed 2.5" R.E. springs for a JKU and it appears i have gained close to or slightly above 4". (I could be wrong though)
I have no armor or anything...
Trying to find out the size of the factory bolts.
I had a BB lift on, and have been using a 2.5" rear shock spacer. Well, after installing my coil lift and new shocks. I realized I lost the factory bolts. the ones that are in now are 2.5" longer and will not keep the shock in place without the...
I've never heard of anyone mention this in the threads I've read.
I recently installed my Metalcloak springs that I've been driving around with in the back of the jeep.
The springs were an advertised 2.5" over stock.
I gained 2 3/4 " over my 2.5"bb height.... soooooo when I am at full droop...
Not installed but just came in!!! Finally!!!!!!!!!
Metalcloak progressive rate springs.
Supposed to be for a 2.5"lift to replace my BB spacers.... sure look a hell of a lot taller !
Well I did the original fender trim mod the day I got 35's and ran it for a year and a half...
I was considering pulling the trigger on an even more low profile set of fenders.... But then I thought..."if I'm gonna change them why don't I play with the ones I got first."
So I did and I love my...