Recent content by toxicwaste29

I bought my fox 2.0 res shocks and have only put roughly 40k miles on them. This is all road miles and one off road trip. I checked them the other week and they are all bad already with no rebound. Also they didn't use any ss hardware on them so the sleeves in the bushings we're seized to my...

Just posting this up. Everyone check out their spare tire spindles if ordered through ru____uff. I have emailed and am waiting for a response but I was driving today and hit an expansion joint on the highway. The same highway I go every day and the entire spindle snapped in half. If you look at...

I bought the heated when they first came out. Ran into some issues with them not heating and had to get both covered under warranty. No issues with the warranty other than me telling them I needed both lights and they only sent one. It was easily cleared up. I recommend the heated. Here is how...

Hello all I posted a while ago about how poison spider would not send me the tire carrier portion of my rock brawler 2 bumper. I already had the bumper and it had the hole in it, I bought it sperate with the assumption I could add the tire carrier later. Anyways I finally got around to welding...

I currently have rk 2.5 springs with 1" spacers. My total actual lift is 3.5". I have a 12 jku with bumpers front and rear. The rk springs I have are a couple years old and the old style and they are riding too stiff so Im planning on changing them out to plush rides. When I originally did the...

Just putting this out there for other to look for. I have roughly 10,000 miles on my ko2's. I 5 tire rotated them every oil change and have only been on one off road trip so far with them. My lugs are starting to loose chunks on one of my tires. They are all the same row of lugs also so I'm sure...

I feel the same way. Can't stand light bars on vehicles specially when they go down the road with them on. ATVs I'm okay with it however. I saw a stock wrangler yesterday with a 50" light bar on top the windshield, another 50" on the front bumper and a 30" on the hood. Looked gay as hell

The write ups I see about setting caster show taking the measurements with the tire off. How does this happen? Do you put jack stands under the axle; couldn't they slip when moving the axle around? Or do you support the frame and just let the axle hang; would that show proper measurements?

I run an afe filter on my 3.6 and haven't had any bad experiences yet with it

Just saw this article. The JL is confirmed for an ecodiesel and straight axles front and rear. http://www.fourwheeler.com/news/1605-first-look-2018-jeep-wrangler-jl-in-heavy-camouflage/

I have a set of piaa 520 they seem to work better than a light bar. Here's what I noticed. The trucklite low beam are for close distance. The piaas do medium distance. Then the trucklites high beam do far distance. The piaas stay more focused however at farther distances than the trucklites that...

^ that's what I would do. If you have a trailer rated for 1200 no sense in putting a 3500 on it when it will ripe the trailer itself apart

I'm building one right now for a landscaping trailer for my business. It is 7'6" x 14'. I spent $520 in steel with it getting cut to spec. Have the means to weld it myself. I did up the plans myself in cad. The axle, hangers, springs, etc for 3500 lbs ran me about $400. I could have bought one...

If your doing an efi conversion I'm assuming it will add a return line. The Holley efi kits adds a return line. You however likely don't have a return line and will need to add one.

I bought metalcloak upper arms and a track bar a couple years back when I was a greenhorn and didn't know better. Well I've been dealing with handling issues and decided to double check my castor. Anyways here is what I found about their junk. Not sure if this is normal for upper arms but I...