Recent content by KY_Jeep

Baja Designs Fog lights were the last install. LoJack isn't pulling 17amps, it would melt and/or set the Jeep on fire. As would most anything else pulling that much. Has to be something big like the motor generator or 48V battery for the etorque. Its currently at the dealer since its under...

The Tazer has been installed for almost 2 months with no issues. I had already set everything and not messed with it anymore. It was plugged in incase I wanted to use any live functions, but that's it. Had to go back to the dealer anyways this morning. They didn't mention doing a flash on the...

Bought it used couple months ago with 4100 miles. Bone stock. Yea I probably could, but whatever the issue is, they are going to have to fix it anyways. I can’t get that lucky it’s just something simple I fix and go on with life.

I could see 13.5 if the battery has been drained and not charged in a bit, but should come up to normal 13.8-14.2 after driving for a bit. I did have 2 other load test done on battery and both passed with no issue. Voltage doesn't move much, no matter what is disconnected, been as low as...

I will try to make this a clear as I can. 2022 JLU Rubicon 7,100 miles 3.6Etorque w/ auto Mini Tazer, LoJack ,Warn Zeon 10-S and Baja Designs Squadron Fog lights hooked up to AUX 1 factory switch. These are the only "electrical" mods done on the Jeep. Have had no warning lights of any kind or...

Thanks for all the advice. Debating my options. I didn’t buy it cause it’s the rage just trying to simplify life, and as per my usual… making it more difficult lol.

Anyone else ran into this issue? Putting a factor 55 flatlink on my warm zeon 10s, but the eyelet will not fit inside the link. I know I could put it in there and force it but I don’t think this should be this tight. Any thoughts?

Thanks for the replies. I’m glad to see that’s normal!

I thought that too, and when I just unspooled it i noticed some of those areas and worked them back and forth but some seem to be way worse. Hopefully it does work itself out.

The line is very stiff in spots.

Used my Warn Zeon10 S for the first time today. Was hooked to a JT stuck in a mud hole. First Jeep that hooked to it was sliding in the sand so I hooked up to make the pull easier. All seemed to go fine and we pulled it out. I was in the Jeep spooling the line while someone was holding tension...

Can see it now. Thanks.

Photo not showing up.

I think so to, my issue is wondering about the angle that I pull in at. Since its not a straight shot in the door, pulling in or out will pitch the front or back of the Jeep up. Maybe I'm overthinking how much that will really come into play??? Thanks for the reply.

Just trying to get a general idea of a JL Rubicon on 35s with a 2" lift and a 3" lift. (yes I know the exact tire brand can change the tire height) After having two JKs and having a big shop to work in, I picked up a 22 Rubicon. Issue is my garage door at my new house is standard height, and my...