Recent content by jsukey

So far this year I've added front and rear Nemesis Notorious fenders after having them powdercoated, a new Poison Spyder Stubby bumper to match the new fenders, mounted a new set of 37" Nitto Trail Grapplers on my beadlocks, front and rear Ace Engineering inner fenders, B&M shifter, Pioneer...

I'm running a hybrid of the RNR and the PSC. Lots of people have been asking where I installed the anti-splash vent. There is a great spot on the fender, right behind the battery. Here is a pic of my setup.

Here’s my grocery getter! ‘10 Jeep SRT8 Arrington 7.2L 440 stroker - 700 hp True Street built trans Wavetrac in the rear end 11.08 1/4 mile @ 118 mph 3.5 second 0-60 mph

I drilled and mounted mine to the AEV skid plate on the front bumper. Been there for 4 years with no major damage.

Sold, please delete Sold!!!!!!

Installed, with puh-lenty of clearance!! Thanks for the help guys!

If it bugs you bad enough that you want to upgrade it, RockHard 4x4 has a really nice upgrade available made from 3/16” steel! I have WAL to thank for it! It’s only $220 and comes powdercoated.

Hey guys, quick question. Bought, installed, and tested the RH4x4 transfer case skid plate last week. Looks great paired with their beefy crossmember...thanks WAL! I was going to wait a little bit before I bought the engine skid, but Ebay had a 15% off sale yesterday, so it saved me $50 on it...

Not to hijack a thread, but I’ve been having a similar vibration as well at speeds above 70. This is a pic of my front driveshaft as it leaves the T/C. I’m guessing my caster is waaay off from the looks of it. Am I right?

I didn't realize that they had started putting a cubby hole there in the newer JK's with the manual window option. My '07 was ordered with factory half doors, so the panel there was just blank. I mounted the switches for my front and rear lockers, front light bar, and Rigid Dually's there. I...

Greetings, all of you sexy ass Jeepers! Told you it was going to be a warm intro! My apologies for just now getting around to doing an intro. I wanted to make sure this was still an active forum first. It seems as a bunch of the other JK forums have almost died out, as there is very little...

JMG Designs Tailgate System has been sold. Gift Certificate is still available. Won both of these in a raffle awhile back. I already had a tailgate molle system, so it's never been installed. I still have the mounting hardware for it. It is a little dusty from sitting in my garage. If it...

Some of you may have seen my post about trying to rectify my issue. My axle was pushed a little too far back, and I had the adjustments screwed all the way in. They would fit just fine with a chop saw and a couple of minutes. They weren't sure why they were longer...they just sent me a new...

I debated on that light when I got my AEV bumper. I ended up going with the Delta Tech LED lights that fit in your spare tires lugnut holes. I got them for around $30 from QT. That was over 4 years ago, and they are still performing great. Super easy install, and nice and bright as well!

So I noticed this half dry puddle of coolant while changing out my alternator. I'm not missing any coolant, so the leak isn't constant. I didn't have a chance to crawl under the Jeep to check, but I would assume that the weep hole is on the 6 o'clock position of the water pump itself. The...