Recent content by Frydaddy

Can confirm, White/grey wire, from connector C200, Pin 3. That is the reverse signal wire. Cameras are usually a low load, so I would assume about 18-22 gauge wire would be sufficient. I do not know what size this White/Grey wire is.

I'm a little surprised this question comes up so often. It doesn't come with a nut from the factory, so you need an M6-1.0 Flange Nut.

If its a connection issue, the clamp might not be tight, and a jump start would bypass this issue. For checking your connections, here is a handy wiring reference You too BruggyMonster

there is a way to bypass all that traction control stuff. If you ever need it to be completely off, Take apart your center console and splice a switch to the Purple wire with the Light Blue stripe. Leave the switch ON when on the highway, then flip it OFF when on the trail. (Disclaimer: Only to...

I really just drove right by it when I saw the orange sticker. That means the authorities have already been there right? This spring, we saw a guy trying to get to I-17 from Cave creek Road through Table Mesa Road with a Late model BUICK! Now Cave Creek, is like an old dirt road, but Table...

This guy was freshly abandoned on the Bloody Basin road to Sheep Bridge. The miles leading up to this, show him fishtailing and taking the turns at speed!

Every time...

I just got one of those Lithium-ion Jump packs too, to replace my Harbor Freight Jump Box in a can. To say that Jump frog will get 20 starts seems quite optimistic, Maybe if the battery still has some life in it.What is its capacity? I would guess 8000mA pouch cells by the size. The one I got...

My favorite infographic, RE:picking the right grounding lugs.

Rescued someone that was stranded for ten hours last night. The Explorer was buried up to the frame, fairly easy pick. But the first hundred feet of the trail was pretty intense. The dude tried to go around a steep rocky shelf, and almost rolled it right down the hill! We got him his wife, and...

TPS for an I-6! Heres a simple one. Many know where it is, some know what it does, less know what it is, but even less know how.

Well I finally installed it. I have mixed feelings on the quality. I peeled back the 3M tape, and saw how they wired it up. I think a calibrated wire would probably do better. (http://w6dek.com/dipole.html) I wanted to put it vertically on the windshield, but it would be too distracting...

SDG, Thats an awesome Jerry can! I did onboard water a few weeks ago. With onboard water and power to boot, Im glad I built everything hidden. The cargo bay is completely clear for actual cargo. Compressed air chuck and a garden hose connection both front and rear. Used the stock bumper for...

I dont know what to say. Even the PrecisionLED website shows 8000K as "cool white". Your picture looks like what they list as 6000K.

I guess its good to be helpful. OP, The name for your Renegade should be relative to something significant to you or your jeep. Heres how I got a few names for mine. (still havent settled on one yet) Rosita - southwestern name, for where i live, and the obvious color of the Jeep Felix - It...