dlm_jku's latest activity

Good point. The previous owner must have done that, I upgraded the shaft and added skids later, so didn't even consider that the exhaust...

That’s asking to potentially break exhaust studs. I’d just have a shop modify you exhaust

This is the correct way to fix your issue. As soon as I installed an aftermarket driveshaft I removed the exhaust spacers.

Take out those exhaust spacers you have in there. They aren’t necessary especially with the aftermarket driveshaft.

Can't attest to the JK, but on the JL and JT the catalytic convertor is just above that exhaust flange and over the upper CA mount. Bad...

Potentially a bad idea as it can break somewhere like at the flange or at the very least, damage the gasket and cause a leak. That said...

I had this problem and would get a rattle after a trail run.... First time I bent the skid back... second time I just added a shim to...

I have a feeling this is a bad idea, but I was wondering if it would be possible to put a jack on my exhaust (at the lowest point shown...

As a good part of routine maintenance on your Jeep JK Wrangler, it is highly recommended that you service your NV241 or NV241OR transfer...