2010 jeep unlimited rubicon purchased brand new 6 years ago. One owner low mileage trail-puff. Needs a little love to be a daily driver, some doors, a top and problably a sway bar, but you could take it out and run all The hammer trails this weekend
I have found 4 black doors locally that you...
I would highly recommend pulling the spark plugs and cranking the engine anytime you flop. It does not take long to get enough oil into the cylinders to seize the engine. I got lucky here. After about 2 minuets I decided to fire it back up and try to back out. Won't do that again. Get the jeep...
There is a lot of Misinformation about ORI struts. ORI struts are nothing like an air shock. There is an upper and lower chamber to charge and they are super easy to adjust and make changes, way easier than a coil over. They also have fluid in them. I will tell you that on a 5500# jk it takes a...
Off my 2010 has 37k miles. Works great, asking $500 I will be in Newport Beach June 6th-14th if you want to pick it up there I will hold it with a deposit. Also have the harness if you need it.
Located in Phoenix arizona
All 4 doors off if my 2010 black rubicon for sale. Asking $2100 for all 4. I may sell them individually if the price is right. They have power windows and locks, tinted windows and have spent very little time on my jeep, problably used less than 5000 miles. I'm not giving them away so don't...
I tow my jeep all the time. Although flat towing is the easiest way, I trailer mine. My 4 door weighs about 6000lbs and my trailer weighs another 1800. My f150 Eco boost tows it with no problem on a standard hitch. Not sure if you are planing on using a trailer or flat towing, I can't get your...
I have always been told the stock rear track bar was strong and buying aftermarket was a waste. If you wheel your rig hard you may want to upgrade. Here is a picture of mine next to a stock trackbar when I removed it today. When the damage occurred it was bent a lot more and also flexed from...
Yes I ran their front shafts in my d44 front for about 3 months until I broke one and could not get a replacement from them. Then I upgraded to the 60s. I am running Yukon shafts in my d60s.