Recent content by chipper

  1. chipper

    Beadlock Wheels are they necessary

    I’m sure some more experienced members will chime in. But 15 has been good for me here in Fl. We have lots of sand Sent from my iPhone using WAYALIFE mobile app
  2. chipper

    On Board air compressor vs tank style air

    I use a DIY powertank. I have under $100 into it. Not including the bracket to hold it. It’s a 10lbs cost about $35 to fill. Can fill about 30 tires or so. I do like this for my set up. Sent from my iPhone using WAYALIFE mobile app
  3. chipper

    Beadlock Wheels are they necessary

    Necessary no. I still use my stock rims with 35” and air down to 15 psi. But they are on my want list because you can go to a lower psi Sent from my iPhone using WAYALIFE mobile app
  4. chipper

    What did Brown Santa show up with today..

    A new Adams front driveshaft Sent from my iPhone using WAYALIFE mobile app
  5. chipper

    Enforcer lift install

    Make sure you have some kind of cut off wheel or sawzaw to cut the rear trackbar bracket, maybe a grinder to get rid of the sharp edges and spray paint for the bare metal to prevent rusting. As for the steering stabilizer, I used my stock one but had to trim off half of the metal piece so it...
  6. chipper

    The Winch Thread

    ^^^^ right. Mine too. Sent from my iPhone using WAYALIFE mobile app
  7. chipper

    Evo rock sliders low angle step vs. regular rock sliders?

    Not sure if you decided yet but this may help. Pick came from their FB Sent from my iPhone using WAYALIFE mobile app
  8. chipper

    WIN - STRIKE FORCE ZEBRA Half Doors

    What a great giveaway, thanks. Fingers crossed Sent from my iPhone using WAYALIFE mobile app
  9. chipper

    Max weight for OEM spare tire carrier

    I had found that this works great for the extension on the rubber stops to close up the gap Sent from my iPhone using WAYALIFE mobile app
  10. chipper

    Good deal?

    Wave !!! I don't think it's a good deal. Your already talking about having to fix and change things. Start fresh. Sent from my iPhone using WAYALIFE mobile app
  11. chipper

    CB Radio

    Run it the way your planning on, and then check your SWR's. If they are to high , run a separate ground wire from your antenna mount to something close by that would have a good ground. DO NOT cut into your coax. Also sometimes the spring you attach your antenna to, will give you problems...
  12. chipper

    FLEX FRIDAY!! Let's See Pics of your Jeep Twisted Up!!

    So glad it's Friday Sent from my iPhone using WAYALIFE mobile app
  13. chipper

    JCR Crusader rock sliders

    This happened to someone I know this past weekend. It a JCR skid plate. Yeah... it's not supposed to look like this. Taco is a good word Sent from my iPhone using WAYALIFE mobile app
  14. chipper

    What was done to your rig this week?

    Installed my new bumper and winch. Pretty happy with my choices [emoji6] Sent from my iPhone using WAYALIFE mobile app
  15. chipper

    EVO 1/4 Pounder install and Swaybar Relocation

    Question: what are the 2 holes on the side of the 1/4 lber under the EVO cut out for? I'm just curious. Sent from my iPhone using WAYALIFE mobile app
Top Bottom