Recent content by bdubnit

Got this error message last Saturday on our 2020 JLU with <3000 miles. Before the error message after turning on the vehicle it showed the red battery light and followed that with letting me know the start/stop function is currently unavailable. Tried turning off and back on, but would cycle...

So quick update... Now that i understand pinion angle a lot more i realized the front driveshaft was likely the main culprit. Disconnected it and the majority of the vibrations went away. Am now getting just a small vibration in second on decel but i think i can attribute that to the rear drive...

I think that other pic is actually pre adjustable uppers. I just took a pic where it currently is. The rear uppers are brought in as much as possible but to the eye it looks like it’s a little high in this pic? Maybe i need to get some adjustable lowers to really dial it in. If the driveline...

Would you say this is too low still? Sent from my iPhone using WAYALIFE mobile app

Hey guys, just trying to pinpoint what's going on with my jeep... 2012 2dr JK man trans My jeeps currently on a 3.5" rough country springs and fixed rough country front lowers, synergy rear uppers. front and rear adams driveshafts. Replaced the front driveshaft a few years back and didn't seem...

So i had the misfortune of buying a used jeep a while back and the previous owner had installed the full river raider skid plate system. After many oil changes and countless paper towels later, I decided to see if maybe I was just unlucky and the oil drain hole was cut out of the wrong spot on...

I'm trying to finish installing my synergy sway bar quick disconnects and the quick disco pin doesn't fit inside the bushing on the link. Logic tells me in order for the pin to fit I need to remove that metal inner piece?? What's the best way to do that?

That was great! I love how she played it cool at the top and just eased on.

Just a couple months ago I installed a synergy tie rod, Synergy drag link flip, Synergy Track Bar relocation bracket, and the Synergy Steering Stabilizer kit with the fox 2.0 Steering Stabilizer. This is my first time doing something like this but i'd say everything went pretty smoothly. All of...