What was done to your rig this week?

Waiting on a new drag link. I'm running the old style rock krawler that is straight with no bend at the knuckle and the RAM wants to share the same space as it. I have a synergy drag link coming this week. The bend at the knuckle should kick it out far enough to give the RAM and fittings clearance

Sent from my XT1096 using WAYALIFE mobile app

Yea I have the synergy draglink with my PSC too. On PSC's website, I think they actually recommend synergy for the steering components to go with it as well.


Sent from my iPhone using WAYALIFE mobile app
 
IMG_1490.jpg
Got new hood decals on but very disappointed with the quality of the decals. They have small rips in the corner of the letters and the adhesive will not stick to my hood. I can just touch the decal and it falls off. I hope OffRoad Evolution will send me new ones or reimburse my money. Never had a problem like this with other decals. The WAYALIFE decal was amazing quality and stuck very well.


Sent from my iPhone using WAYALIFE mobile app
 
<img src="http://wayalife.com/attachment.php?attachmentid=240361"/> Got new hood decals on but very disappointed with the quality of the decals. They have small rips in the corner of the letters and the adhesive will not stick to my hood. I can just touch the decal and it falls off. I hope OffRoad Evolution will send me new ones or reimburse my money. Never had a problem like this with other decals. The WAYALIFE decal was amazing quality and stuck very well. Sent from my iPhone using WAYALIFE mobile app

I will recommend contacting them and working it out before airing something like this on a public forum - until they give you reason to.
 
I will recommend contacting them and working it out before airing something like this on a public forum - until they give you reason to.

Talked with them and they are sending me some new ones. Great customer support. Wasn't trying to put any company down in my post, just stating what happened. I love all my Evo products, that's why I couldn't believe I had an issue with this in the first place. Can't wait to get my new ones to replace the bad ones.


Sent from my iPhone using WAYALIFE mobile app
 
Installed my PS Wide Aluminum flares. Took me two days to knock it out by myself while taking my time. PA fender laws drove my decision for the wide flares. IMG_1214.jpgIMG_4149.jpgIMG_4153.jpg


Sent from my iPhone using WAYALIFE mobile app
 
I had the Crawler Conceptz aluminum inner fenders worked on. They were trimmed a little to allow for my shock reservoirs before they were installed, but once installed they made horrible sounds when going over even the slightest of bumps. It sounded like the front end was going to fall apart. They were pulled back off the Jeep and trimmed along the bottom which fixed it 100%. Tons of salt and road grime from the light snow today, but you can see where they needed to be trimmed.

29DBCB89-36BC-4355-8B14-7E6156E73089_zpsrrxkqysd.jpg


E376AB2E-0087-4848-93E5-11AC42CB9331_zpsnrl4c3v3.jpg
 
I had the Crawler Conceptz aluminum inner fenders worked on. They were trimmed a little to allow for my shock reservoirs before they were installed, but once installed they made horrible sounds when going over even the slightest of bumps. It sounded like the front end was going to fall apart. They were pulled back off the Jeep and trimmed along the bottom which fixed it 100%. Tons of salt and road grime from the light snow today, but you can see where they needed to be trimmed.

29DBCB89-36BC-4355-8B14-7E6156E73089_zpsrrxkqysd.jpg


E376AB2E-0087-4848-93E5-11AC42CB9331_zpsnrl4c3v3.jpg
Those look great
 
Top Bottom